电磁辐射测试方法 第3部分：LED光源用内置电子控制装置

[中文适用范围]： 本文件详细规定了LED光源应用的电子控制装置（ECG）的内部参考灯具的构造和参数、评估无线电干扰特性的测量程序及条件。本文件仅适用于具有以下特征或应用的电子控制装置（也称为“控制装置”）以及用户可更换的电子控制装置：应用于I类安全保护等级的灯具（注：这意味着ECG本身的电源接口可具有保护接地（PE）或功能接地（FE）端子，详见4.6条和表2）；线性外形因子，即符合图A.1 a)中定义的提供空间；额定输出功率小于360 W的ECG。本文件不包括：在CISPR 15:2018和CISPR 15:2018/AMD1:2024中排除的应用的ECG；仅具有L、N输入端子（无PE端子）的控制装置。 [外文原描述]： CISPR TR 30-3:2026 which is a Technical report , details the construction and parameters of a reference luminaire, a measurement procedure and conditions for assessment of the radio disturbance characteristics of electronic control gears (ECG) for LED light sources applied inside. This document is limited to ECGs (also called “control gears”) as well as end-user replaceable ECGs with the following characteristics or applications: - applied in luminaires with safety protection class I; NOTE This means that the mains interface of the ECG itself can have either a protective earth (PE) or a functional earth (FE) terminal. For details, see 4.6 and Table 2. linear form factor, i.e. fits within the space provision defined in Figure A.1 a). - ECGs with a rated output power less than 360 W. Excluded from the scope of this document are - ECGs for applications that are excluded in CISPR 15:2018 and CISPR 15:2018/AMD1:2024, and - control gear with only L, N input terminals (without PE terminal).