标准摘要
[中文适用范围]： IEC 60034-1:2026 作为 RLV 版本提供，包含国际标准及其修订版，清晰列出了与上一版本相比所有技术内容的变更。 该标准适用于所有旋转电机，但铁路和公路车辆用旋转电机除外，后者由 IEC 60349 系列标准覆盖。配备集成电磁兼容（EMC）有源元件（如变频驱动器）的电机被视为电力驱动系统（参见 IEC 61800 系列标准）。在此类情况下，本文件仅适用于电力驱动系统中的电机部分。 本文件范围内的电机还可能受其他标准中覆盖、修改或补充要求的约束，例如 IEC 60079 和 IEC 60092。 注：若本文件中的某些条款为适应特殊应用（例如受辐射影响的电机或航空航天用电机）而修改，则其余条款在兼容的前提下仍然适用。 本第十五版取消并取代了于 2022 年发布的第十四版，构成技术性修订。 与上一版本相比，本版包含以下重大技术变更： - 第 1 章：增加关于配备集成 EMC 有源元件电机的说明； - 第 2 章：更新规范性引用文件； - 第 3 章：删除关于“协议”含义的注，增加缩略语表； - 第 4.2.9 条和第 4.2.10 条：删除对 IEC TS 60034-25 的引用，因变频器负载已在第 3.36 条中定义； - 第 5.1 条：将 IEC TS 60034-25 的引用改为注； - 第 6.6 条：澄清相关要求； - 第 7.2.1 条：将 IEC TS 60034-25 的引用改为注； - 第 7.5 条：澄清相关要求； - 第 7.6 条：将 IEC TS 60034-25 的引用改为注； - 第 8.1 条：澄清相关引用； - 第 8.6.1 条：澄清大型电机方法选择； - 表 11：更新热级 200（N）的数值； - 第 8.10.3 条：澄清相关要求； - 第 9.2 条：澄清旧电机重绕后的试验电压； - 表 17：合并并澄清项目 9 和 10； - 第 9.7 条：增加关于库存电机超速试验的说明； - 表 20：澄清变频器负载电机的试验转速； - 第 10.2 条：澄清术语“数字形式”； - 第 10.3 条：删除关于二维码的注； - 第 11.1 条：增加保护性接地测试的引用； - 第 13.1 条：增加澄清流程图； - 第 13.2.2 条：澄清集成变频驱动装置的电机； - 第 13.3 条：经与 ACEC 协商后澄清相关要求； - 第 13.5 条：经与 ACEC 协商后澄清相关要求； - 第 14 条：将安全注改写为常规文本。 [外文原描述]： IEC 60034-1:2026 is available as IEC 60034-1:2026 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-1:2026 is applicable to all rotating electric machines, except rotating electric machines for rail and road vehicles, which are covered by the IEC 60349 series of standards. Machines with integrated EMC-active components such as a variable frequency converter are considered being a power drive system (see the IEC 61800 series of standards). In such cases, this document applies to the motor component of the power drive system only. Machines within the scope of this document can also be subject to superseding, modifying or additional requirements in other standards, for example, IEC 60079 and IEC 60092. NOTE If particular clauses of this document are modified to meet special applications, for example machines subject to radioactivity or machines for aerospace, all other clauses apply insofar as they are compatible. This fifteenth edition cancels and replaces the fourteenth edition published in 2022. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: Clause 1: Clarification with respect to machines with integrated EMC-active components added Clause 2: Normative references updated Clause 3: Note on meaning of “agreement” deleted; list of abbreviations added Clause 4.2.9, 4.2.10: References to IEC TS 60034-25 deleted, as converter duty is now defined in 3.36 Clause 5.1: Reference to IEC TS 60034-25 converted into note Clause 6.6 Clarification of requirements Clause 7.2.1: Reference to IEC TS 60034-25 converted into note Clause 7.5: Clarification of requirements Clause 7.6: Reference to IEC TS 60034-25 converted into note Clause 8.1: Clarification of references Clause 8.6.1: Clarification on choice of method for large machines Table 11: Updated values for thermal class 200 (N) Clause 8.10.3: Clarification of requirements Clause 9.2: Clarification on test voltage for old machines after rewinding Table 17: Items 9 and 10 merged and clarified Clause 9.7: Clarification on overspeed test for machines held at stock added Table 20: Clarification on test speed for converter duty machines Clause 10.2: Clarification of term ‘digital form’ Clause :10.3 Note on QR code deleted Clause 11.1: Reference to protective earth test added Clause 13.1: Clarifying flowchart added Clause 13.2.2: Clarification on motors with integrated VSD added Clause 13.3: Clarification of requirements after consultation with ACEC Clause 13.5: Clarification of requirements after consultation with ACEC Clause 14: Note on safety converted to normal text
英文名称Rotating electrical machines - Part 1: Rating and performance