小型熔断器. 第6部分: 小型管状熔断体的熔断器座

[中文适用范围]： 本部分IEC 60127适用于IEC 60127-2规定的 miniature cartridge fuse-links（微型熔断器）和IEC 60127-3规定的 sub-miniature fuse-links（次微型熔断器）的熔断器座，用于保护电气设备、电子设备及其零部件，通常设计用于室内。本部分适用于最大额定电流为16 A、最大额定电压为1500 V直流或1000 V交流的熔断器座，以及通常海拔高度为2000 m以下的场合（除非另有说明）。本标准的目的是为熔断器的安全以及电气、机械、热和气候特性以及熔断器与熔断体之间的兼容性建立统一的要求。 表1列出了具有不同特征的熔断器座的示例，包括安装类型（面板和基座安装、印刷电路板安装）、固定方法（面板固定、PC板固定）、熔断器载体插入方法（螺纹插入、卡口插入、插接插入）、端子类型（螺纹端子、焊接端子、快速连接端子、其他无焊接端子）以及防触电保护类型（无保护、有保护、增强保护）。 [外文原描述]： IEC 60127-6:2014 is applicable to fuse-holders for miniature cartridge fuse-links according to IEC 60127-2 and sub-miniature fuse-links according to IEC 60127-3 for the protection of electric appliances, electronic equipment and component parts thereof, normally intended for use indoors. Examples of fuse-holder types with different features are given. This part of IEC 60127 applies to fuse-holders with: - a maximum rated current of 16 A; and - a maximum rated voltage of 1 500 V d.c. or 1 000 V a.c.; and - for use up to 2 000 m above sea-level, unless otherwise specified. The object of this standard is to establish uniform requirements for safety and the assessment of electrical, mechanical, thermal and climatic properties of fuse-holders and the compatibility between fuse-holders and fuse-links. This second edition cancels and replaces the first edition published in 1994, its Amendment 1 (1996) and Amendment 2 (2002). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - modify the arrangement of the fuse-holder samples in the planes in 13.1.1; - add a new test 13.2.2: Glow-wire ignition test; - change maximum gauge size for standard sheets 3 and 4 from 0,70 to 0,63 in table 5; - change minimum gauge size for standard sheets 3 and 4 from 0,55 to 0,56 in table 5. Keywords: fuse-holders for miniature cartridge fuse-links, sub-miniature fuse-links, protection of electric appliances, electronic equipment and component parts.