低压熔断器 第4部分：半导体器件保护用熔断器的补充要求

[中文适用范围]： IEC 60269-1 applies with the following supplementary requirements. Fuse-links for the protection of semiconductor devices shall comply with all requirements of IEC 60269-1, if not otherwise indicated hereinafter, and shall also comply with the supplementary requirements laid down below. These supplementary requirements apply to fuse-links for application in equipment containing semiconductor devices for circuits of nominal voltages up to 1000 V AC or 1500 V DC. For some fuse-links higher rated voltages can be used. NOTE Such fuse-links are commonly referred to as "semiconductor fuse-links". The object of these supplementary requirements is to establish the characteristics of semiconductor fuse-links in such a way that they can be replaced by other fuse-links having the same characteristics, provided that their dimensions are identical. For this purpose, this standard refers in particular to a) the following characteristics of fuses: 1) their rated values 2) their temperature rises in normal service 3) their power dissipation 4) their time-current characteristics 5) their breaking capacity 6) their cut-off current characteristics and their I²t characteristics 7) their arc voltage characteristics b) type tests for verification of the characteristics of fuses c) the markings on fuses d) availability and presentation of technical data (see Annex BB). [外文原描述]： IEC 60269-4:2024 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60269-4:2024 edition 6.0 and the previous IEC 60269-4:2009+AMD1:2012+AMD2:2016 CSV edition 5.2. Furthermore, comments from IEC SC 32B experts are provided to explain the reasons of the most relevant changes, or to clarify any part of the content. IEC 60269-4:2024 applies with the following supplementary requirements. Fuse-links for the protection of semiconductor devices shall comply with aIl requirements of IEC 60269-1, if not otherwise indicated hereinafter, and shall also comply with the supplementary requirements laid down below. These supplementary requirements apply to fuse-links for application in equipment containing semiconductor devices for circuits of nominal voltages up to 1 000 V AC or 1 500 V DC. For some fuse‑links higher rated voltages can be used.