标准摘要
[中文适用范围]： 本部分IEC 60317规定了200级双涂层漆包圆铜绕组线的要求。底层涂层基于聚酯或聚酯酰亚胺树脂，可进行改性，只要保留原始树脂的化学特性并满足所有规定的线材要求。叠加涂层基于聚酰胺酰亚胺树脂。 注：改性树脂是经过化学变化或含有一个或多个添加剂的树脂，以增强某些性能或应用特性。 200级是一个热等级，要求最低温度指数为200，热冲击温度至少为220°C。 与温度指数对应的摄氏温度不一定是建议线材运行的温度，这将取决于许多因素，包括所涉及设备的类型。 本标准涵盖的标称导体直径范围如下： - 等级1：0.050 mm至2.000 mm（含）； - 等级2：0.050 mm至5.000 mm（含）。 标称导体直径在IEC 60317-0-1的第4条中规定。 [外文原描述]： IEC 60317-13:2010+AMD1:2024 CSV specifies the requirements of enamelled round copper winding wire of class 200 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide-imide resin. The main changes with respect to the previous edition are: - new requirements for appearance; - reference to new resistance to refrigerants test in IEC 60851-4; - deletion of high temperature failure requirement; - new pin hole test requirements. This publication is to be read in conjunction with IEC 60317-0-1:2008 .
英文名称Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200