标准摘要
[中文适用范围]： IEC 60317 的这一部分规定了 180 级可焊接漆包圆铜绕组线的要求，该绕组线具有基于聚酯酰亚胺树脂@的唯一涂层，可以对其进行修改，前提是它保留原始树脂的化学特性并满足所有指定的电线要求。注：改性树脂是经过化学变化@或含有一种或多种添加剂以增强某些性能或应用特性的树脂。本标准涵盖的标称导体直径范围为： - 1 级：0@020 mm 至 1@600 mm（包括 1@600 mm）； -2 级：0@020 毫米至 1@600 毫米（含）。 IEC 60317-0-1:2013 第 4 条规定了标称导体直径。 [外文原描述]： IEC 60317-23:2013 specifies the requirements of solderable enamelled round copper winding wire of class 180 with a sole coating based on polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE - A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this standard is: - Grade 1: 0,020 mm up to and including 1,600 mm; - Grade 2: 0,020 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013. This third edition cancels and replaces the second edition published in 1990, Amendment 1:1997 and Amendment 2:1999. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - new 3.2.2 containing general notes on winding wire, formerly a part of the scope; - revision to references to IEC 60317-0-1:2013 to clarify that their application is normative; - consolidation of 17.1 and 17.2 of the solderability requirements; - modification to Clause 19, Dielectric dissipation factor; - new Clause 23, Pin hole test. Keywords: requirements of solderable enamelled round copper winding wire, class 180, sole coating based on polyesterimide resin
英文名称Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180