标准摘要
[中文适用范围]： GB/T 7095 的本部分规定了200级双涂层漆包铜扁绕组线的要求。内涂层以聚酯或聚酯亚胺树脂为基，如能保留原树脂的化学特性并满足对漆包线规定的所有要求， 则该树脂可以改性。外涂层以聚酰胺酰亚胺树脂为基。 注:改性树脂是一种经过化学变化的， 或者含有一种或多种添加剂以提高其某种性能或使用特性的树脂。 200级表示热级， 它要求最小温度指数为200， 热冲击温度至少为200℃. 对应于温度指数的摄氏温度并不就是推荐的漆包线使用温度， 因为这取决于包括使用设备类型在内的许多因素。 本部分适用的导体标称尺寸范围为： －－宽边尺寸：最小2.00 mm, 最大16.00 mm ； －－窄边尺寸：最小0.80 mm, 最大5.60 mm。 本部分包括1级和2级漆膜厚度漆包铜扁线， 并适用于导体的全部规格范围。 宽边尺寸和窄边尺寸的组合以及宽/窄比见GB/T 7095.1-2008。 [外文原描述]： IEC 60317-29:1990 specifies the requirements of enamelled rectangular copper winding wire of class 200 with a dual coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is based on polyamide-imide resin. Class 200 is a thermal class that requires a minimum temperature index of 200 and a heat shock temperature of at least 220 °C. The temperature in degrees Celsius corresponding to the temperature index is not necessarily that at which it is recommended that the wire be operated and this will depend on many factors, including the type of equipment involved. The range of nominal conductor dimensions covered by this standard is: - width: min. 2,0 mm max. 16,0 mm; - thickness: min. 0,80 mm max. 5,60 mm. Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified width/thickness ratio are given in IEC 60317-0-2.
英文名称Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200