标准摘要
[中文适用范围]： IEC 60317的本部分规定了玻璃纤维缠绕、树脂或清漆浸渍、裸露或漆包矩形铜绕组线的要求，温度指数为180。 注：对于此类电线，热冲击试验是不合适的，因此热冲击温度不能被成立。因此，不能指定基于温度指数和热冲击温度要求的等级。本标准涵盖的标称导体尺寸范围为：宽度：最小。最大 2.0 毫米16.0 毫米；厚度：最小。最大 0,80 毫米5,60 毫米。指定的宽度和厚度组合以及指定的宽度/厚度比符合 IEC 60317-0-4。 [外文原描述]： IEC 60317-31:2015 specifies the requirements of glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper winding wire, temperature index 180. The range of nominal conductor dimensions covered by this standard is: - width: min.2,0 mm max.16,0 mm; - thickness: min.0,80 mm max. 5,60 mm. The specified combinations of width and thickness as well as the specified width/thickness ratio are according to IEC 60317-0-4. This second edition cancels and replaces the first edition published in 1990, Amendment 1:1997 and Amendment 2:2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - new 3.2.2 containing general notes on winding wire, formerly part of the scope; - introduction of glass fibre coverings over grade 1 enamelled conductor in 3.2.2; - revision to references to IEC 60317-0-4 to make clear that their application is normative. Keywords: temperature index 180, winding wire This publication is to be read in conjunction with IEC 60317-0-4:2015.
英文名称Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180