标准摘要
[中文适用范围]： 与 IEC 317-0-4 结合使用。涵盖以下导体尺寸： a) 宽度从 2.0 mm 到 16.0 mm； b) 厚度从 0.80 毫米到 5.60 毫米。 [外文原描述]： IEC 60317-32:1990 specifies the requirements of polyester or polyesterimide varnish-treated glass-fibre wound, polyester or polyesterimide varnish-treated, bare or grade 2 enamelled rectangular copper winding wire, temperature index 155. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. The enamelled wire shall be based on one of the following standards and shall be agreed between purchaser and supplier. - IEC 60317-16:1990, Specifications for particular types of winding wires - Part 16: Polyester enamelled rectangular copper wire, class 155 - IEC 60317-28:1990, Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180 - IEC 60317-29:1990, Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 When an enamelled wire is used, it must have a minimum class of 130.
英文名称Specifications for particular types of winding wires - Part 32: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155