标准摘要
[中文适用范围]： 本部分 IEC 60317 规定了带有双涂层的 180 级漆包圆铜绕组线的要求。底层涂层基于聚酯酰亚胺树脂，可以改性，只要保留原始树脂的化学特性并满足所有指定的导线要求即可。叠加的涂层是基于热塑性树脂的粘合层。 注：改性树脂是经过化学变化或含有一种或多种添加剂以增强某些性能或应用特性的树脂。 本部分涵盖的标称导体直径范围为： - 1B 级：0.020 毫米至 1.600 毫米（含）； - 2B 级：0.020 毫米至 1.600 毫米（含）。 标称导体直径在 IEC 60317-0-1:2013 的第 4 条中规定。 [外文原描述]： IEC 60317-37:2013+AMD1:2024 CSV specifies the requirements of enamelled round copper winding wire of class 180 with a dual coating. The underlying coating is based on polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The superimposed coating is a bonding layer based on a thermoplastic resin. NOTE - A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this part is: - Grade 1B: 0,020 mm up to and including 1,600 mm; - Grade 2B: 0,020 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013. This second edition cancels and replaces the first edition published in 1992, Amendment 1:1997 and Amendment 2:1999. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - new 3.2.2 containing general notes on winding wire, formerly a part of the scope; - revision to references to IEC 60317-0-1:2013 to clarify that their application is normative; - new Clause 23, Pin hole test. Key words: requirements of enamelled round copper winding wire, class 180, dual coating
英文名称Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer