特种绕组线规范第61部分:温度指数180的聚酯玻璃纤维缠绕树脂或清漆浸渍裸铜线或漆包扁铜线

[中文适用范围]： 本部分IEC 60317规定了聚酯玻璃纤维缠绕、树脂或清漆浸渍的裸、1级或2级漆包矩形铜绕组线的要求，温度指数180。浸渍剂可以是环氧树脂、聚酯或聚酯酰亚胺树脂基的。 注：对于这种类型的线，热冲击试验不适用，因此不能确定热冲击温度。因此，不能指定基于温度指数和热冲击温度要求的类别。 本文件涵盖的标称导体尺寸范围为： 宽度：最小2.0毫米，最大16.0毫米；厚度：最小0.80毫米，最大5.60毫米。 宽度和厚度的指定组合以及指定的宽度/厚度比符合IEC 60317-0-8。 [外文原描述]： IEC 60317-61:2020 specifies the requirements of polyester glass-fibre wound, resin or varnish impregnated bare, grade 1 or grade 2 enamelled rectangular copper winding wires, temperature index 180. The impregnating agent can be, for instance, epoxy, polyester, or polyesterimide resin based. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. The range of nominal conductor dimensions covered by this document is: - width: min. 2,0 mm max. 16,0 mm; - thickness: min. 0,80 mm max. 5,60 mm. The specified combinations of width and thickness as well as the specified width/thickness ratio are according to IEC 60317-0-8. This second edition cancels and replaces the first edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - revision of the title of the standard; - revision to Clause 1, Scope; - revision to the descriptions of grades of thickness of polyester glass-fibre coverings in 3.2.2.