标准摘要
[中文适用范围]： 本国际标准适用于商用微波设备的安全，其额定电压对于单相连接（一相与中性线之间）的设备不超过 250 V，对于其他设备不超过 480 V。此类设备通常包括开式波导 applicator（如图 103 所示概述），用于处理负载。设备分为三种类型：带有插入式 applicator（通常用于通过插入地板、墙壁或天花板中的孔洞去除水分）、带有大面积接触式 applicator（通常用于干燥地板、墙壁或天花板）以及带有小面积接触式 applicator（通常用于油漆去除和局部加热）。本标准不适用于：家用微波炉、带腔门或带运输装置的商用微波炉、工业微波加热设备、医疗设备、实验室用设备和在特殊环境（如存在腐蚀性或爆炸性气氛）下使用的设备。 [外文原描述]： IEC 60335-2-110:2013+A1:2019 deals with the safety of microwave appliances intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. Appliances covered by this standard incorporate an open-ended applicator (as example an overview is given in Figure 103) for treatment of the load. They are divided into three types: - with insertion applicator, typically for moisture removal by insertion into holes in floors, walls or ceilings (an example is given in Figure 106); - with large area contacting applicator, typically for drying of floors, walls or ceilings (examples are given in Figure 104 and Figure 105); - with small area contacting applicator, typically for paint removal and spot-heating (an example is given in Figure 107). This consolidated version consists of the first edition (2013) and its amendment 1 (2019). Therefore, no need to order amendments in addition to this publication. Key words: commercial microwave appliance, insertion applicator, contacting applicator This publication is to be read in conjunction with IEC 60335-1:2010 .
英文名称Household and similar electrical appliances - Safety - Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators