标准摘要
[中文适用范围]： 本文件规定了用于管状荧光灯的灯座和启动器座的技术和尺寸要求，以及用于确定灯在灯座中和启动器在启动器座中的安全性和适配性的测试方法。本文件涵盖独立灯座和嵌入式灯座，用于与附录A所列灯头的管状荧光灯一起使用，以及独立启动器座和嵌入式启动器座，用于与符合IEC 60155的启动器一起使用，适用于工作电压不超过1000 V r.m.s.的交流电路。本文件还涵盖集成在外壳和圆顶中的单帽管状荧光灯的灯座，类似于爱迪生螺纹灯座（例如，用于G23和G24灯头的灯座）。此类灯座根据IEC 60238的以下条款和子条款进行测试：9.4; 9.5; 9.6; 10.3; 11.7; 12; 13.2; 13.5; 13.6; 13.7; 14; 16.3; 16.4; 16.5和16.9。本文件还涵盖与灯具一体或设计用于内置到电器中的灯座。它仅涵盖灯座的要求。对于所有其他要求，例如端子区域的电击保护，适用相关电器标准的要求，并在内置到适当设备中时，根据其自身标准进行测试。仅供灯具制造商使用的灯座不用于零售。本文件还尽可能适用于上述未明确提及的灯座和启动器座以及灯连接器。 [外文原描述]： IEC 60400:2017+A1:2020 states the technical and dimensional requirements for lampholders for tubular fluorescent lamps and for starterholders, and the methods of test to be used in determining the safety and the fit of the lamps in the lampholders and the starters in the starterholders. This eighth edition cancels and replaces the seventh edition published in 2008, Amendment 1:2011 and Amendment 2:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - alignment with ISO/IEC drafting rules; - renumbering of clauses, tables and figures. This bilingual version (2017-12) corresponds to the monolingual English version, published in 2017-06. The French version of this standard has not been voted upon. This consolidated version consists of the eighth edition (2017) and its amendment 1 (2020). Therefore, no need to order amendments in addition to this publication.
英文名称Lampholders for tubular fluorescent lamps and starterholders