标准摘要
[中文适用范围]： 本标准规定了三种挤出聚氯乙烯（PVC）非热缩型绝缘套管的规范。此类套管通常提供内径高达50毫米，壁厚范围在0.2毫米至1.8毫米之间。每种规格书涵盖三个壁厚等级：'薄壁'、'标准壁'和'厚壁'，对应不同的击穿电压要求。规格书100和103涵盖温度范围为-10°C至90°C的套管；规格书101和104涵盖温度范围为-1°C至105°C的套管；规格书102和105涵盖温度范围为-40°C至70°C的套管。这些套管通常提供以下不透明颜色：黑色、棕色、红色、橙色、黄色、绿色、蓝色、紫色、灰色、白色、粉色、绿松石色和绿/黄色。它们也提供透明、半透明和无色形式。除本标准列出的尺寸和颜色外，其他尺寸和颜色可能作为定制产品提供。如果这些产品满足表5中列出的其他性能要求，则应视为符合本标准。 [外文原描述]： Gives the requirements for three types of non-heatshrinkable sleeving, extruded from PVC. Sleeving of this type is normally available with an internal diameter up to 50 mm and in a range of wall thicknesses between 0,2 mm and 1,8 mm. Each sheet covers up to three levels of wall thickness, "thin wall", "standard wall" and "thick wall" related to nominal internal diameter and with corresponding differences in requirements for breakdown voltage. Sheets 100 and 103 cover sleeving having a temperature range of -10 °C to 90 °C. Sheets 101 and 104 cover sleeving having a temperature range of -10 °C to 105 °C. Sheets 102 and 105 cover sleeving having a temperature range of -40 °C to 70 °C.
英文名称Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving