火灾危险试验.第2-10部分:基于灼热/热丝的试验方法.灼热丝装置和通用试验程序

[中文适用范围]： 本部分IEC 60695规定了模拟热应力影响的灼热丝装置和通用测试程序，这些热应力可能由热源（如发光元件或过载电阻器）在短时间内产生，以通过模拟技术评估火灾危险。 本文档描述的测试程序是一种通用测试程序，适用于使用标准化电加热丝作为点火源的小规模测试。 这是适用于终端产品和固体电绝缘材料或其他固体可燃材料的测试程序的通用部分。 每个特定测试程序的详细描述见IEC 60695-2-11、IEC 60695-2-12和IEC 60695-2-13。 本基本安全出版物侧重于安全测试方法，主要供技术委员会根据IEC指南104和ISO/IEC指南51中规定的原则编制安全出版物时使用。 技术委员会的责任之一是在适用的情况下利用基本安全出版物编制其出版物。除非在相关出版物中特别引用或包含，否则本基本安全出版物的要求、测试方法或测试条件不适用。 [外文原描述]： IEC 60695-2-10:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60695-2-10:2021 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. The test procedure described in this document is a common test procedure intended for the small-scale tests in which a standardized electrically heated wire is used as a source of ignition. It is a common part of the test procedures applied to end products and to solid electrical insulating materials or other solid combustible materials. A detailed description of each particular test procedure is given in IEC 60695-2-11, IEC 60695-2-12 and IEC 60695-2-13. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This standard is to be used in conjunction with IEC 60695-2-11, IEC 60695-2-12, and IEC 60695-2-13. This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) New terms and definitions with regards to times and durations have been added to Clause 3. b) Previous Annex A of Equipment manufacturers and suppliers has been deleted. c) Annex A (previous Annex B) for ignition and flaming observations has been changed from informative to normative. d) New Annex C has been added, which visualizes times and durations, and gives examples for the behaviour of specimens, and how to evaluate them. The contents of the corrigendum of January 2024 have been included in this copy.