电气自动控制.第2-11部分:能量调节器的特殊要求

[中文适用范围]： 在一般情况下，IEC 60730 的本文适用于在、对于或与家用及类似用途设备配合使用的能量调节器，包括用于加热、空调及类似应用的能量调节器。该设备可能使用电力、气体、石油、固体燃料、太阳能热等或其组合。注：这些能量调节器可以是热敏、机械或电气操作的。本标准适用于内在安全性、运行值、运行时间和运行序列（当这些与安全相关时），以及用于或与之配合使用的自动电气能量调节设备的测试。本标准也适用于属于 IEC 60335-1 范围内的电器的能量调节器。在整个标准中，"设备"一词意为"电器和设备"。本标准也适用于可能由公众使用的设备（如商店、办公室、医院、农场及商业和工业应用）的自动电气能量调节器。除非在设备标准中明确提及，否则本标准不适用于专门设计用于工业过程应用的自动电气能量调节器。本标准不适用于专门属于楼宇自动化设备范围内的设备。本标准还适用于作为控制系统一部分使用的单个能量调节器，或具有非电气输出的多功能控制机械集成的能量调节器。本标准适用于由原电池或二次电池供电的控制装置，其要求包含在标准中，包括 Annex V。本标准适用于额定电压不超过 690V AC 或 600V DC 的能量调节器。本标准也适用于包含电子器件的能量调节器，其要求包含在 Annex H 中。本标准还适用于使用 NTC 或 PTC 热敏电阻的能量调节器，其附加要求包含在 Annex J 中。 [外文原描述]： IEC 60730-2-11:2019 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60730-2-11:2019 applies to energy regulators for use in, on, or in association with equipment, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This standard applies to the inherent safety, to the operating values, operating times and operating sequence where these are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, equipment. This standard is also applicable to energy regulators for appliances within the scope of IEC 60335-1. Throughout this standard the word “equipment” means “appliance and equipment”. This standard also applies to automatic electrical energy regulators for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard does not apply to automatic electrical energy regulators designed exclusively for industrial process applications unless explicitly mentioned in the equipment standard. This standard does not apply to equipment that are specifically within the scope of building automation equipment. This standard is also applicable to individual energy regulators utilized as part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs. This standard applies to controls powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision to the title to remove “for household and similar use”; b) changes to the scope and related modifications; c) changes to definitions in Annex H. This Part 2-11 is intended to be used in conjunction with IEC 60730 1. It was established on the basis of the fifth edition of that standard (2013) including Amendment 1 (2015). Consideration may be given to future editions of, or amendments to, IEC 60730-1. Keywords: Automatic Controls, Energy Regulators, Control Systems