电气自动控制.第2-11部分:能量调节器的特殊要求

[中文适用范围]： 本国际部分（IEC 60730）适用于在设备内、设备上或与设备配合使用的能量调节器，包括用于加热、空调及类似应用能量调节器。设备可使用电力、天然气、石油、固体燃料、太阳能热能等或其组合。这些能量调节器可以是热动、机械或电动操作的。本标准适用于与设备安全相关的固有安全性、运行值、运行时间及运行顺序，适用于在设备内或与设备配合使用的自动电气能量调节装置的测试。本标准也适用于IEC 60335-1范围内的家用器具中的能量调节器。标准中“设备”一词指“器具和设备”。本标准也适用于公众可能使用的设备（如商店、办公室、医院、农场、商业和工业应用）中的自动电气能量调节器。除非设备标准中明确提及，否则本标准不适用于专门设计用于工业过程应用的自动电气能量调节器。本标准不适用于专门属于楼宇自动化设备范围内的设备。本标准也适用于作为控制系统一部分使用的单个能量调节器，或具有非电气输出的多功能控制器的机械集成能量调节器。本标准适用于由原电池或二次电池供电的控制装置，其相关要求包含在本标准中（包括附录V）。本标准适用于固有安全性、运行值、时间及顺序与设备安全相关的自动电气控制装置测试。本标准适用于使用热敏电阻的控制装置。本标准也适用于低复杂性安全相关系统和控制的功能安全。本标准适用于手动能量调节器，如果它们与自动控制在电气和/或机械上集成。本标准适用于额定电压不超过690V交流电或600V直流电的能量调节器。本标准也适用于包含电子装置的能量调节器，相关要求见附录H。本标准适用于使用NTC（负温度系数）或PTC（正温度系数）热敏电阻的能量调节器。本标准适用于能够接收和响应通信信号（包括功率计费率和需求响应信号）的控制装置的电气和功能安全。 [外文原描述]： IEC 60730-2-11:2019 applies to energy regulators for use in, on, or in association with equipment, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. This standard applies to the inherent safety, to the operating values, operating times and operating sequence where these are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, equipment. This standard is also applicable to energy regulators for appliances within the scope of IEC 60335-1. Throughout this standard the word “equipment” means “appliance and equipment”. This standard also applies to automatic electrical energy regulators for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard does not apply to automatic electrical energy regulators designed exclusively for industrial process applications unless explicitly mentioned in the equipment standard. This standard does not apply to equipment that are specifically within the scope of building automation equipment. This standard is also applicable to individual energy regulators utilized as part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs. This standard applies to controls powered by primary or secondary batteries, requirements for which are contained within the standard, including Annex V This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) revision to the title to remove “for household and similar use”; b) changes to the scope and related modifications; c) changes to definitions in Annex H. This Part 2-11 is intended to be used in conjunction with IEC 60730 1. It was established on the basis of the fifth edition of that standard (2013) including Amendment 1 (2015). Consideration may be given to future editions of, or amendments to, IEC 60730-1. Keywords: Automatic Controls, Energy Regulators, Control Systems