标准摘要
[中文适用范围]： IEC 60730-2-13:2025 适用于自动电湿度感应控制，具体适用范围包括： - 用于、安装于或与家用电器及类似用途设备配合使用的场合；注1：本文件中，“设备”一词指电器及相关设备，“控制”一词指湿度感应控制。 - 用于建筑自动化系统，其范围涵盖 ISO 16484 系列及 IEC 63044 系列（HBES/BACS）； - 供公众使用的设备，例如商店、办公室、医院、农场以及商业与工业应用中所使用的设备；示例1：商业餐饮、供暖与空调设备中的湿度感应控制； - 具备智能功能的控制装置；示例2：智能电网控制、耗能设备（包括计算机或智能手机）的远程接口或控制； - 交流或直流供电的控制装置，其额定电压不超过 690 V 交流或 600 V 直流； - 用于、安装于或与使用电力、燃气、燃油、固体燃料、太阳能热能等能源或其组合的设备配合使用的场合； - 作为控制系统的一部分，或与具有非电信号输出的多功能机械集成控制装置集成的控制装置； - 采用 NTC 或 PTC 热敏电阻及分立热敏电阻的控制装置（相关要求见附录 J）； - 通过机械或电气方式操作，响应或控制温度、压力、时间流逝、湿度、光照、静电效应、流体流动、液面高度、电流、电压、加速度或其组合等特性的控制装置； - 手动控制装置（当其与自动控制装置在电气和/或机械上集成为一体时）。注2：不属于自动控制装置一部分的手动机械开关的要求见 IEC 61058-1-1。 本文件适用于以下方面： - 自动电湿度感应控制装置的固有安全； - 自动电湿度感应控制装置及相关安全系统的功能安全； - 当产品性能（例如电磁兼容性影响）可能损害被控系统整体安全与性能时，湿度感应控制装置的相关要求； - 与设备安全相关的操作参数、操作时间序列及操作顺序。 本文件规定了在相关设备中用于、安装或配合使用的自动电湿度感应控制装置在结构设计、运行及测试方面的要求。 本文件不适用以下情况： - 专用于工业过程应用的自动电湿度感应控制装置，除非相关第2部分或设备标准中另有明确规定。但在缺乏相关安全标准时，可用于评估专门针对工业应用而设计的湿度感应控制装置； - 若湿度感应控制的响应值取决于其安装方法，则本文件不考虑该响应值。当该响应值对用户或周围环境的安全保护具有重要意义时，应以相应设备标准中规定的数值或制造商确定的数值为准； - 输出信号至网络设备的完整性（例如与其他设备的互操作性），除非该方面已被评估。 （注：原文末尾句子不完整，已按现有内容翻译，无法补全缺失部分。） [外文原描述]： IEC 60730-2-13:2025 applies to automatic electrical humidity sensing controls • for use in, on, or in association with equipment for household appliance and similar use; NOTE 1 Throughout this document, the word "equipment" means "appliance and equipment" and "controls" means "humidity sensing control". • for building automation within the scope of ISO 16484 series and IEC 63044 series (HBES/BACS); • for equipment that is used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications; EXAMPLE 1 Humidity sensing controls for commercial catering, heating and air-conditioning equipment. • that are smart enabled controls; EXAMPLE 2 Smart grid control, remote interfaces/control of energy-consuming equipment including computer or smart phone. • that are AC or DC powered controls with a rated voltage not exceeding 690 V AC or 600 V DC; • used in, on, or in association with equipment that use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof; • utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs; • using NTC or PTC thermistors and to discrete thermistors, requirements for which are contained in Annex J; • that are mechanically or electrically operated, responsive to or controlling such characteristics as temperature, pressure, passage of time, humidity, light, electrostatic effects, flow, or liquid level, current, voltage, acceleration, or combinations thereof; • as well as manual controls when such are electrically and/or mechanically integral with automatic controls. NOTE 2 Requirements for manually actuated mechanical switches not forming part of an automatic control are contained in IEC 61058-1-1. This document applies to – the inherent safety of automatic electrical humidity sensing controls, and – functional safety of automatic electrical humidity sensing controls and safety related systems, – humidity sensing controls where the performance (for example the effect of EMC phenomena) of the product can impair the overall safety and performance of the controlled system, – the operating values, operating times, and operating sequences where such are associated with equipment safety. This document specifies the requirements for construction, operation and testing of automatic electrical humidity sensing controls used in, on, or in association with an equipment. This document does not • apply to automatic electrical humidity sensing controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant part 2 or the equipment standard. However, this document can be applied to evaluate humidity sensing controls intended specifically for industrial applications in cases where no relevant safety standard exists; • take into account the response value of an automatic action of a humidity sensing control, if such a response value is dependent upon the method of mounting the humidity sensing control in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer will apply; • address the integrity of the output signal to the network devices, such as interoperability with other devices unless it has been evaluated as part of the control system. This fourth edition cancels and replaces the third edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) adoption to IEC 60730-1:2022 with all of its significant changes to IEC 60730-1:2013, IEC 60730-1:2013/AMD1:2015 and IEC 60730-1:2013/AMD2:2020.
英文名称Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls