标准摘要
[中文适用范围]： IEC 60730-2-14适用于用于、或与家用及类似用途设备关联使用的电动执行器。设备可使用电力、燃气、石油、固体燃料、太阳能热能等或其组合。本标准适用于建筑自动化范围内的电动执行器（适用ISO 16484）。本标准也适用于可能由公众使用的设备的自动电气控制，如用于商店、办公室、医院、农场以及商业和工业应用的设备。本部分2-14还适用于作为控制系统一部分或作为具有非电气输出的多功能控制器的机械整体部分的单个电动执行器。本部分2-14不适用于专门用于工业过程应用的自动电动执行器，除非在相关第2部分或设备标准中明确提及。本部分2-14适用于由一次或二次电池供电的电动执行器，相关要求包含在该标准中（包括附件V）。本部分适用于执行器固有的安全性、操作值、操作时间和操作序列（当这些与设备安全性相关时），以及用于或关联设备的电动执行器的测试。本文件也适用于低复杂性安全相关系统和控制的功能安全。本部分2-14不适用于与由单独第2部分（如IEC 60730-2-8）覆盖的阀门机械集成的电动执行器，也不适用于电动执行器电机，其要求包含在IEC 60034中。本部分适用于机械或电气操作的自动电动执行器，响应或控制温度、压力、时间、湿度、光、静电效应、流量或液位、电流、电压、加速度或其组合。本部分适用于额定电压不超过690V交流电或600V直流电的交流或直流电动执行器。本部分也适用于包含电子器件的电动执行器（要求见附件H）和使用NTC或PTC热敏电阻的电动执行器（要求见附件J）。本部分适用于能够接收和响应通信信号（包括电力计费率和需求响应信号）的电动执行器的电气和功能安全。本部分不处理输出信号到网络设备的完整性（如与其他设备的互操作性），除非该完整性已作为控制系统的一部分进行评估。 [外文原描述]： IEC 60730-2-14:2017+A1:2019+A2:2021 applies to electric actuators for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This International Standard is applicable to controls for building automation within the scope of ISO 16484. This part 2-14 also applies to automatic electrical controls for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. EXAMPLE: Controls for commercial catering, heating and air-conditioning equipment. Electric actuators for appliances are within the scope of IEC 60335. This second edition cancels and replaces the first edition, published in 1995, its Amendment 1 (2001) and its Amendment 2 (2007). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: adapting it to the 5th Ed of IEC 60730-1, addition of checking electric actuators with action 1.AB or 2AB, and modification of tests under abnormal condition. This Part 2-14 is intended to be used in conjunction with IEC 60730-1. It was established on the basis of the 5th edition of that standard (2013). Consideration may be given to future editions of, or amendments to, IEC 60730-1. This part 2-14 supplements or modifies the corresponding clauses in IEC 60730-1, so as to convert that publication into the IEC standard: Particular requirements for electric actuators. Where this part 2-14 states "addition", "modification" or "replacement", the relevant requirement, test specification or explanatory matter in part 1 should be adapted accordingly. Where no change is necessary part 2-14 indicates that the relevant clause or subclause applies.
英文名称Automatic electrical controls - Part 2-14: Particular requirements for electric actuators