自动电气控制 - 第2-6部分：带机械要求的自动电气压力传感控制专用要求 (IEC 60730-2-6:2025; EN IEC 60730-2-6:2025)

[中文适用范围]： 适用范围 IEC 60730-2-6:2025适用于以下自动式电气压力传感控制装置： 1. 用于、安装于或与之配套的器具及类似用途设备； 注1：本文档中，“设备”指器具、设备，“控制”指压力传感控制装置。 2. 适用于ISO 16484系列和IEC 63044系列（HBES/BACS）范围内的楼宇自动化； 示例1：独立安装的自动式电气压力传感控制装置、智能电网系统中的控制装置，以及符合ISO 16484-2范围的楼宇自动化系统控制装置。 3. 供公众使用的设备，例如商店、办公室、医院、农场以及商业和工业应用中的设备； 示例2：用于商业餐饮、供热和空调设备的自动式电气压力传感控制装置。 4. 具备智能功能的自动式电气压力传感控制装置； 示例3：智能电网自动式电气压力传感控制装置、耗能设备的远程接口/控制（包括计算机或智能手机）。 5. 额定交流电压不超过690 V、直流电压不超过600 V的交流或直流供电控制装置； 6. 用于、安装于或与之配套的、使用电力、燃气、燃油、固体燃料、太阳能热能或其组合的设备； 7. 作为控制系统的一部分使用，或作为具有非电气输出的多功能控制装置中机械集成部分使用的控制装置； 8. 使用NTC或PTC热敏电阻，以及分立热敏电阻（相关要求见附录J）的控制装置； 9. 机械或电气操作，响应或控制压力或真空的控制装置； 10. 当手动控制装置与自动控制装置在电气或机械上集成为一体时，亦包括手动控制装置。 注2：不构成自动控制一部分的手动机械开关的要求见IEC 61058-1-1。 本文件同样适用于： - 作为控制系统一部分使用的单个压力传感控制装置； - 与具有非电气输出的多功能控制装置机械集成的压力传感控制装置； - 符合IEC 60335-1范围的器具用压力传感控制装置。 本文件涵盖： - 压力传感控制装置的内建安全性； - 压力传感控制装置及其安全相关功能系统的功能安全性； - 当产品性能（如电磁兼容性现象的影响）可能影响被控系统整体安全性和性能的压力传感控制装置； - 与设备安全相关的操作值、操作时间及操作顺序。 本文件规定了在器具中用于、安装于或与之配套的自动式电气控制装置的构造、运行和测试要求。 本文件不适用于： - 专用于工业过程应用的压力传感控制装置，除非相关第2部分或设备标准中明确说明；但在缺乏相关安全标准的情况下，可用于评估专用于工业应用的自动式电气控制装置； - 若压力传感控制的自动动作响应值依赖于其他因素，则本文件不对其响应值提出要求。 [外文原描述]： IEC 60730-2-6:2025 applies to automatic electrical pressure sensing controls • for use in, on, or in association with equipment for household appliance and similar use; NOTE 1 Throughout this document, the word "equipment" means "appliance and equipment" and "controls" means "pressure sensing controls". • for building automation within the scope of ISO 16484 series and IEC 63044 series (HBES/BACS); EXAMPLE 1 Independently mounted automatic electrical pressure sensing controls, controls in smart grid systems and controls for building automation systems within the scope of ISO 16484-2. • for equipment that is used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications; EXAMPLE 2 Automatic electrical pressure sensing controls for commercial catering, heating and air-conditioning equipment. • that are smart enabled automatic electrical pressure sensing controls; EXAMPLE 3 Smart grid automatic electrical pressure sensing controls, remote interfaces/control of energy-consuming equipment including computer or smart phone. • that are AC or DC powered controls with a rated voltage not exceeding 690 V AC or 600 V DC; • used in, on, or in association with equipment that use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof; • utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs; • using NTC or PTC thermistors and to discrete thermistors, requirements for which are contained in Annex J; • that are mechanically or electrically operated, responsive to or controlling a pressure or vacuum; • as well as manual controls when such are electrically and/or mechanically integral with automatic controls. NOTE 2 Requirements for manually actuated mechanical switches not forming part of an automatic control are contained in IEC 61058-1-1. This document is also applicable to individual pressure sensing controls utilized as part of a control system or pressure sensing controls which are mechanically integral with multi-functional controls having non-electrical outputs. This document is also applicable to pressure sensing controls for appliances within the scope of IEC 60335-1. This document applies to - the inherent safety of pressure sensing controls, and - functional safety of pressure sensing controls and safety related systems, - pressure sensing controls where the performance (for example the effect of EMC phenomena) of the product can impair the overall safety and performance of the controlled system, - the operating values, operating times, and operating sequences where such are associated with equipment safety. This document specifies the requirements for construction, operation and testing of automatic electrical controls used in, on, or in association with an equipment. This document does not • apply to pressure sensing controls intended exclusively for industrial process applications unless explicitly mentioned in the relevant part 2 or the equipment standard. However, this document can be applied to evaluate automatic electrical controls intended specifically for industrial applications in cases where no relevant safety standard exists; • take into account the response value of an automatic action of a pressure sensing control, if such a response value is dependent upon the method of mounting the control in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer will apply; • address the integrity of the output signal to the network devices, such as interoperability with other devices unless it has been evaluated as part of the control system. This document contains requirements for electrical features of pressure sensing controls and requirements for mechanical features that affect their intended operation. NOTE Subclause 20.101, as it pertains to gas and/or oil controls, is under consideration pending review or revision of ISO 22967, ISO 22968 and ISO 23550, if applicable. In general, these pressure sensing controls are integrated or incorporated with the equipment or are intended to be integrated in, or on the equipment. This document also covers these controls when they are independently mounted. In-line cord controls are not covered by this document. This fourth edition cancels and replaces the third edition published in 2015 and its Amendment 1:2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: Adoption of IEC 60730-1:2022 with all of its significant changes to IEC 60730-1:2013, IEC 60730-1:2013/AMD 1:2015 and IEC 60730-1:2013/AMD2:2020.