自动电气控制.第2-9部分:温度敏感控制器的详细要求

[中文适用范围]： “IEC 60730 的这一部分适用于在设备@上使用或与设备@相关的自动电气温度传感控制，包括用于加热@空调和类似应用的电气控制。设备可以使用电力@天然气@石油@固体燃料@注：本标准中“设备”一词包括“器具”和“控制系统”。本标准适用于自动电气温度传感控制装置的组成部分ISO 16484 范围内的楼宇自动化控制系统。本标准还适用于公众@使用的设备的自动电气温度传感控制，例如用于商店@办公室@医院@农场和商业的设备除非相关设备标准中明确提及，否则本标准不适用于专门用于工业过程应用的自动电气温度传感控制装置。本标准适用于与设备安全相关的固有安全性、操作值、操作时间和操作顺序，以及设备中使用或与设备相关的自动电气温度传感控制装置的测试。注：此类控制装置的示例包括锅炉恒温器@风扇控制装置@温度限制器和热断路器。该标准也适用于低复杂性安全相关温度传感控制和系统的功能安全。本标准还适用于具有非电气输出的温度传感控制装置的电气安全，例如制冷剂流量和气体控制装置。本标准适用于与自动温度传感控制装置电气和/或机械集成的手动控制装置。注：对于不构成自动控制一部分的手动开关的要求包含在 IEC 61058-1 中。本标准适用于额定电压不超过 690 V 交流或 600 V 直流的交流或直流供电的温度传感控制器。 本标准不考虑温度传感控制器自动动作的响应值，如果该响应值是取决于将其安装在设备中的方法。如果响应值对于保护用户@或周围环境@具有重要目的，则应适用相应设备标准中定义的值或制造商确定的值。本标准还适用于包含附件 H 中包含的电子器件@要求的温度传感控制装置以及附件 J 中包含的使用 NTC 热敏电阻或 PTC 热敏电阻@要求的温度传感控制装置。本标准适用于定义的单一操作装置在这个标准中。” [外文原描述]： IEC 60730-2-9:2015 applies to automatic electrical temperature sensing controls for use in, on or in association with equipment, including electrical controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard is applicable to automatic electrical temperature sensing controls forming part of a building automation control system within the scope of ISO 16484. This standard also applies to automatic electrical temperature sensing controls for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard does not apply to automatic electrical temperature sensing controls intended exclusively for industrial process applications, unless explicitly mentioned in the relevant equipment standard. This standard applies to the inherent safety, to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of automatic electrical temperature sensing control devices used in, or in association with, equipment. This standard is also applicable to the functional safety of low complexity safety-related temperature sensing controls and systems. This fourth edition cancels and replaces the third edition published in 2008, and its Amendment 1:2011. This edition constitutes a technical revision. This edition includes alignment with the text of 60730-1 fifth edition and the following significant technical changes with respect to the previous edition: - modification of heating-freezing tests in Clause 12; - alignment of the EMC requirements in H.26 to those in other part 2 standards and - addition of requirements in Clause H.27 to cover class B and C control functions of temperature sensing controls. This publication is to be read in conjunction with IEC 60730-1:2013.