标准摘要
[中文适用范围]： IEC 60793 的这一部分主要用于测试由光纤制造商生产的光纤或随后使用各种聚合物进行涂层（紧缓冲）的光纤。该测试可以在生产出来的纤维上进行，也可以在暴露于各种环境后进行。该测试适用于 A1、A2、A3、B 和 C 纤维。该标准的目的是建立机械特性——涂层可剥离性的统一要求。该测试量化了沿光纤纵轴机械去除保护涂层所需的力。该测试并不是为了在涂层去除后最大化光纤强度，也不是为了指定光纤现场剥离的最佳条件。该测试设计用于具有标称外径在 240 μm 至 900 μm 范围内的聚合物涂层的光纤。不建议将此方法应用于外涂层直径在 230 μm 至 930 μm 范围之外的光纤。 [外文原描述]： IEC 60793-1-32:2010 is intended primarily for testing either fibres as produced by a fibre manufacturer or subsequently overcoated (tight buffered) using various polymers. The test can be performed either on fibres as produced or after exposure to various environments. This test applies to A1, A2, A3, B and C fibres. This edition has been modified to include current practices in the market place. This publication contains colours which are considered to be useful for the correct understanding of its contents
英文名称Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability