光纤 - 第1-32部分:测量方法和测试程序 - 涂层剥离性

[中文适用范围]： IEC 60793 的这一部分主要用于测试由光纤制造商生产的光纤或随后使用各种聚合物进行涂层（紧缓冲）的光纤。该测试可以在生产的纤维上进行，也可以在暴露于各种环境后进行。该测试适用于标称玻璃尺寸为125μm的A1@A2@A3@B和C光纤。本文件的目的是对机械特性 ?C 涂层可剥离性建立统一的要求。该测试量化了沿光纤纵轴机械去除保护涂层所需的力。该测试并不是为了在涂层去除后最大化光纤强度，也不是为了指定光纤现场剥离的最佳条件。该测试专为具有聚合物涂层且标称外径在 200 Ω 范围内的光纤而设计。到900??。 [外文原描述]： IEC 60793-1-32:2018 is intended primarily for testing either fibres as produced by a fibre manufacturer or subsequently overcoated (tight buffered) using various polymers. The test can be performed either on fibres as produced, or after exposure to various environments. This test applies to A1, A2, A3, B and C fibres with a nominal glass dimension of 125 µm. The object of this document is to establish uniform requirements for the mechanical characteristic – coating strippability. This test quantifies the force required to mechanically remove the protective coating from optical fibres along their longitudinal axis. This test is not intended as a means to maximize fibre strength after the coating is removed nor is it intended to specify the best conditions for field stripping of optical fibres. This test is designed for optical fibres having polymeric coatings with nominal outer diameters in the range of 200 µm to 900 µm. This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: expansion of the range of coating dimensions applicable to the procedure detailed in this document to accommodate optical fibres with a 200 µm coating dimension. Keywords: coating strippability, protective coating of optical fibres