家用及类似用途插头插座 第2-6部分：固定电气装置用带联锁开关插座的特殊要求

[中文适用范围]： IEC 60884-2-6:2025 EXV 包含国际标准及其扩展版本 (EXV)。此官方 IEC 标准的扩展版本仅提供英文版，为用户提供标准的全面内容。IEC 60884-2-6:2025 EXV 包括对 IEC 60884-1:2022 的引用内容。IEC 60884-2-6:2025 适用于仅用于交流电的带联锁开关插座，用于固定电气装置，带或不带接地触点，额定电压高于 50 V 但不超过 440 V，额定电流不超过 32 A，用于家庭和类似用途，室内或室外均可。根据本文件，带联锁的带开关插座由符合 IEC 60884-1 的插座组合组成，并与符合 IEC 60669-1 和/或 IEC 60669-2-1 的开关联锁，作为完整附件提供。对于配备无螺丝端子的固定附件，额定电流最大限制为 16 A。本文件不涵盖嵌入式安装盒的要求。但是，它涵盖了插座测试所需的表面式安装盒的要求。第二版取消并取代了 1997 年发布的第一版。此版本构成技术修订。与前一版相比，此版本包括以下重大技术变化：a) 与 IEC 60884-1 第四版保持一致。 [外文原描述]： IEC 60884-2-6:2025 EXV contains both the international standard and its extended version (EXV). This extended version of the official IEC Standard is available in English only and provides the user with a comprehensive content of the Standard. IEC 60884-2-6:2025 EXV includes the content of the references made to IEC 60884-1:2022. IEC 60884-2-6:2025 applies to switched socket-outlets with interlock for AC only, for fixed electrical installations, with or without earthing contact, with rated voltage above 50 V but not exceeding 440 V and a rated current not exceeding 32 A, intended for household and similar purposes, either indoors or outdoors. Switched socket-outlets with interlock according to this document consist of a combination of socket-outlets according to IEC 60884‑1, interlocked with a switch according to IEC 60669‑1 and/or IEC 60669‑2‑1 supplied as a complete accessory. The rated current is limited to 16 A maximum for fixed accessories provided with screwless terminals. This document does not cover requirements for flush mounting boxes. However, it covers those requirements for surface-type mounting boxes which are necessary for the tests on socket-outlets. This second edition cancels and replaces the first edition published in 1997. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) alignment to IEC 60884-1, fourth edition.