标准摘要
[中文适用范围]： IEC 60884-2-6:2025 仅适用于交流电用带联锁开关插座，适用于固定电气装置，带或不带接地触点，额定电压在 50 V 以上但不超过 440 V，额定电流不超过 32 A，用于家庭和类似用途，室内或室外。根据本文件，带联锁开关插座由符合 IEC 60884-1 的插座组合组成，与作为完整附件提供的符合 IEC 60669-1 和/或 IEC 60669-2-1 的开关联锁。对于配备无螺纹端子的固定附件，额定电流最大限制为 16 A。本文件不涵盖嵌入式安装盒的要求。但是，它涵盖了插座测试所必需的表面式安装盒的要求。第二版取消并取代了 1997 年发布的第一版。本版构成技术修订。此版本与前一版本相比包括以下重大技术变化：a)与 IEC 60884-1 第四版保持一致。 [外文原描述]： IEC 60884-2-6:2025 applies to switched socket-outlets with interlock for AC only, for fixed electrical installations, with or without earthing contact, with rated voltage above 50 V but not exceeding 440 V and a rated current not exceeding 32 A, intended for household and similar purposes, either indoors or outdoors. Switched socket-outlets with interlock according to this document consist of a combination of socket-outlets according to IEC 60884‑1, interlocked with a switch according to IEC 60669‑1 and/or IEC 60669‑2‑1 supplied as a complete accessory. The rated current is limited to 16 A maximum for fixed accessories provided with screwless terminals. This document does not cover requirements for flush mounting boxes. However, it covers those requirements for surface-type mounting boxes which are necessary for the tests on socket-outlets. This second edition cancels and replaces the first edition published in 1997. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) alignment to IEC 60884-1, fourth edition.
英文名称Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations