电磁兼容性 (EMC) 第 4-15 部分：测试和测量技术 闪烁计 功能和设计规范

[中文适用范围]： IEC 61000-4-15:2010 RLV 包含国际标准及其红线版本。 Redline 版本为您提供了一种快速、简单的方法来比较该标准与其先前版本之间的所有更改。 Redline 版本不是正式的 IEC 标准，只有当前版本的标准才被视为正式文件。 IEC 61000-4-15:2010 给出了闪烁测量设备的功能和设计规范，旨在指示所有实际电压波动波形的正确闪烁感知水平。提供信息以使得能够构建这样的仪器。给出了一种基于符合本标准的闪烁计输出来评估闪烁严重程度的方法。 IEC 61000 本部分中的闪烁计规格仅涉及 120 V 和 230 V、50 Hz 和 60 Hz 输入的测量。其他电压的一些白炽灯的特性与表 1 和表 2 中的值非常相似，因此可以对这些其他电压应用校正因子。附件 B 中提供了其中一些校正因子。除上述给出的电压和频率之外的详细规格仍在考虑中。 IEC 61000 这部分的目的是为模拟或数字闪烁测量设备的设计和仪器提供基本信息。它没有给出闪烁严重程度的容限限值。第二版取消并取代了 1997 年发布的第一版及其修正案 1（2003 年），并构成技术修订。这个新版本特别增加或澄清了几个直接测量参数的定义，从而避免了不同的解释。根据 IEC 指南 107，它具有基本 EMC 出版物的地位。电磁兼容；智慧城市 [外文原描述]： IEC 61000-4-15:2010 RLV contains the International Standard and its Redline version. The Redline version provides you with a quick and easy way to compare all the changes between this standard and its previous edition. The Redline version is not an official IEC Standard, only the current version of the standard is to be considered the official document. IEC 61000-4-15:2010 gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be constructed. A method is given for the evaluation of flicker severity on the basis of the output of flickermeters complying with this standard. The flickermeter specifications in this part of IEC 61000 relate only to measurements of 120 V and 230 V, 50 Hz and 60 Hz inputs. Characteristics of some incandescent lamps for other voltages are sufficiently similar to the values in Table 1 and Table 2, that the use of a correction factor can be applied for those other voltages. Some of these correction factors are provided in the Annex B. Detailed specifications for voltages and frequencies other than those given above, remain under consideration. The object of this part of IEC 61000 is to provide basic information for the design and the instrumentation of an analogue or digital flicker measuring apparatus. It does not give tolerance limit values of flicker severity. This second edition cancels and replaces the first edition published in 1997 and its Amendment 1 (2003) and constitutes a technical revision. This new edition, in particular, adds or clarifies the definition of several directly measured parameters, so that diverging interpretations are avoided. It has the status of a basic EMC publication in accordance with IEC Guide 107.