电磁兼容性(EMC).第4-15部分:试验和测量技术.闪烁计.功能和设计规范

[中文适用范围]： 本部分IEC 61000规定了用于指示所有实际电压波动波形下正确闪烁感知水平的闪烁测量装置的功能和设计规范。提供了构建此类仪器的信息。给出了基于符合本标准的闪烁测量仪输出评估闪烁严重程度的方法。本部分IEC 61000中的闪烁测量仪规范仅适用于120 V和230 V、50 Hz和60 Hz输入的测量。对于其他电压，某些白炽灯的特性与表1和表2中的值足够相似，因此可以应用修正系数。Annex B提供了一些此类修正系数。关于上述给定电压和频率以外的电压和频率的详细规范仍在考虑中。本部分IEC 60000的目的是为模拟或数字闪烁测量仪的设计和仪器化提供基本信息。它不提供闪烁严重程度的容差限值。 [外文原描述]： IEC 61000-4-15:2010 gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be constructed. A method is given for the evaluation of flicker severity on the basis of the output of flickermeters complying with this standard. The flickermeter specifications in this part of IEC 61000 relate only to measurements of 120 V and 230 V, 50 Hz and 60 Hz inputs. Characteristics of some incandescent lamps for other voltages are sufficiently similar to the values in Table 1 and Table 2, that the use of a correction factor can be applied for those other voltages. Some of these correction factors are provided in the Annex B. Detailed specifications for voltages and frequencies other than those given above, remain under consideration. The object of this part of IEC 61000 is to provide basic information for the design and the instrumentation of an analogue or digital flicker measuring apparatus. It does not give tolerance limit values of flicker severity. This second edition cancels and replaces the first edition published in 1997 and its Amendment 1 (2003) and constitutes a technical revision. This new edition, in particular, adds or clarifies the definition of several directly measured parameters, so that diverging interpretations are avoided. It has the status of a basic EMC publication in accordance with IEC Guide 107. The contents of the corrigendum of March 2012 have been included in this copy.