标准摘要
[中文适用范围]： IEC 61000 的这一部分考虑了电气和/或电子设备的抗扰度测试和辐射测量。仅考虑辐射现象。它建立了使用全消声室进行辐射抗扰度测试和辐射发射测量所需的测试程序。注：根据 IEC 指南 107 [1]，IEC 61000-4-22 是供 IEC 产品委员会使用的基本 EMC 出版物。如指南 107 中所述，产品委员会负责确定 EMC 标准的适用性。 TC 77 和 CISPR 及其小组委员会准备与产品委员会合作，确定特定产品的特定 EMC 测试的价值。本部分规定了在同一 FAR 中进行辐射电磁发射测量和辐射电磁抗扰度测试时的通用验证程序、被测设备 (EUT) 设置要求以及全消声室 (FAR) 的测量方法。作为基本测量标准，IEC 61000 的这一部分无意指定应用于特定设备或系统的测试级别或发射限值。其主要目标是向 IEC 或 CISPR 所有相关产品委员会提供通用测量程序。具体的产品要求和测试条件由负责的产品委员会定义。本标准中描述的方法适用于30 MHz至18 GHz频率范围内的辐射发射测量和抗扰度测试。 [外文原描述]： IEC 61000-4-22:2010 considers immunity tests and emission measurements for electric and/or electronic equipment. Only radiated phenomena are considered. It establishes the required test procedures for using fully anechoic rooms for performing radiated immunity testing and radiated emission measurements. IEC 61000-4-22:2010 establishes a common validation procedure, equipment under test (EUT) set-up requirements, and measurement methods for fully anechoic rooms (FARs) when both radiated electromagnetic emission measurements and radiated electromagnetic immunity tests will be performed in the same FAR. As a basic measurement standard, this part of IEC 61000 does not intend to specify the test levels or emission limits to be applied to particular apparatus or system(s). Its main goal is to provide general measurement procedures to all concerned product committees of IEC or CISPR. Specific product requirements and test conditions are defined by the responsible product committees. The methods described in this standard are appropriate for radiated emission measurements and immunity tests in the frequency range of 30 MHz to 18 GHz. IEC 61000-4-22:2010 has the status of a basic EMC publication in accordance with IEC Guide 107, Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications.
英文名称Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emissions and immunity measurements in fully anechoic rooms (FARs)