电磁兼容性(EMC).第4-6部分:测试和测量技术.射频场感应的传导干扰抗扰性

[中文适用范围]： 本IEC 61000标准部分涉及电气设备在150 kHz至80 MHz频率范围内，由意图的射频（RF）发射器产生的传导电磁骚扰的抗扰度要求。没有任何至少一根传导线或电缆（如电源线、信号线或接地连接）将设备耦合到干扰射频场的设备，不在此标准的范围内。注1：本IEC 61000标准部分定义了测试方法，用于评估由电磁辐射引起的传导骚扰信号对设备的影响。对这些传导骚扰的模拟和测量在定量确定效应方面并不足够精确。所定义的测试方法旨在建立在不同设施中结果足够的可重复性，以便对效应进行定量分析。本标准的目的是为评估电气设备在遭受由射频场引起的传导骚扰时的功能抗扰度建立共同参考。本IEC 61000标准部分中记录的测试方法描述了一种一致的方法来评估设备或系统对定义现象的抗扰度。注2：正如IEC指南107所述，本标准是IEC产品委员会使用的 EMC 基础出版物。如指南107所述，IEC产品委员会负责决定是否应用此抗扰度测试标准，以及如果应用，负责确定适当的测试等级和性能标准。 [外文原描述]： IEC 61000-4-6:2013 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 150 kHz up to 80 MHz. Equipment not having at least one conducting wire and/or cable (such as mains supply, signal line or earth connection) which can couple the equipment to the disturbing RF fields is excluded from the scope of this publication. The object of this standard is to establish a common reference for evaluating the functional immunity of electrical and electronic equipment when subjected to conducted disturbances induced by RF fields. The test method documented in IEC 61000-4-6:2013 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. This fourth edition cancels and replaces the third edition published in 2008 and constitutes a technical revision. It includes the following significant technical changes with respect to the previous edition: - use of the CDNs; - calibration of the clamps; - reorganization of Clause 7 on test setup and injection methods; - Annex A which is now dedicated to EM and decoupling clamps; - Annex G which now addresses the measurement uncertainty of the voltage test level; - and informative Annexes H, I and J which are new. The contents of the corrigendum of June 2015 have been included in this copy.