电气设备的测量 控制和实验室使用的安全要求 - 第2-010部分:材料加热的实验室设备的特殊要求

[中文适用范围]： 本IEC 61010-2-010标准规定了适用于以下a)至c)类电气设备的特定安全要求及其附件，无论其 intended use 如何，只要设备的功能之一是对材料进行加热。此外，如果设备用于体外诊断（IVD）目的，还需符合IEC 61010-2-101的要求。本部分与IEC 61010-1的最新版本配合使用，用于将第1部分转化为针对实验室加热设备的特定要求标准。如果设备包含加热和制冷系统，且两者的组合产生比单独处理时更严重或额外的危险，则可能适用IEC 61010-2-012而非本部分。本部分不适用于实验室的加热和通风设备、灭菌设备，以及设计用于操作人员进入的大型加热和/或制冷设备。 [外文原描述]： IEC 61010-2-010:2019 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever the heating of materials is one of the functions of the equipment. a) Electrical test and measurement equipment This is equipment which by electromagnetic means tests, measures, indicates or records one or more electrical or physical quantities, also non-measuring equipment such as signal generators, measurement standards, power supplies for laboratory use, transducers, transmitters, etc. b) Electrical industrial process-control equipment This is equipment which controls one or more output quantities to specific values, with each value determined by manual setting, by local or remote programming, or by one or more input variables. c) Electrical laboratory equipment This is equipment which measures, indicates, monitors, inspects or analyses materials, or is used to prepare materials, and includes in vitro diagnostic (IVD) equipment. This fourth edition cancels and replaces the third edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) alignment with changes introduced by Amendment 1 of IEC 61010-1:2010; b) alignment with IEC 61010-2-011 and IEC 61010-2-012: - new matching Introduction clarifying which standard(s) to use; - new 5.4.101 instructions for flammable liquid; - subclause 9.5 on flammable liquids replaced with text from IEC 61010-2-012; c) subclause 5.2.101 deleted; d) requirements in 10.101 b) and c) clarified. It has the status of a group safety publication in accordance with IEC Guide 104.