标准摘要
[中文适用范围]： Clause 1 of IEC 61058-1:2016 is applicable, except as follows. This document applies to independently mounted switches for appliances (mechanical or electronic) actuated by hand, by foot or by other human activity-for-use with, to operate or control electrical appliances and other equipment for household-and or similar purposes with a rated voltage not exceeding 440480 V and a rated current not exceeding 63 A. These switches are intended to be operated by a person, via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral with or arranged separately, either physically or electrically, from the switch and involve transmission of a signal, for example, electrical, optical, acoustic or thermal, between the actuating member or sensing unit and the switch. Switches which incorporate additional control functions governed by the switch function are within the scope of this document. This standard applies to independently mounted switches intended to be used with an appliance or equipment. This document also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is provided by a remote control or by a part of an appliance or equipment, such as a door. NOTE 1 Electronic switches can be combined with mechanical switches giving full disconnection or microdisconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic disconnection. Therefore, the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates, additional requirements may be necessary can apply. NOTE 4 Attention is drawn to the fact that the standards for appliances and equipment may can contain additional or alternative requirements for switches. NOTE 4 Throughout this standard the word "switch" means "independently mounted switch" unless otherwise stated. NOTE 5 Throughout this document, the word "appliance" means "appliance or equipment". This standard applies to switches intended to be mounted apart from the appliance (independently mounted switches) other than those within the scope of IEC 669-1. [外文原描述]： IEC 61058-2-4:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 61058-2-4:2018 applies to independently mounted switches for appliances (mechanical or electronic) actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. This second edition cancels and replaces the first edition published in 1995 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - overall format modified to support the revised structure of the series; - Annexes K and M have been included as an integral part of this document; - Annex L has been included for information purposes only. This document is to be used in conjunction with IEC 61058-1:2016.
英文名称Switches for appliances - Part 2-4: Particular requirements for independently mounted switches