标准摘要
[中文适用范围]： 本文件适用于用于连接灯具和半灯具的B15d和B22d卡口灯座，供电电压为250V。本文件还包括与灯具集成或打算内置到电器中的灯座。它仅涵盖灯座的要求。对于所有其他要求，如端子区域的电击防护，相关电器标准的要求在安装到适当设备后观察和测试，当该设备根据其自身标准进行测试时。仅供灯具制造商使用的灯座不用于零售。当灯座用于灯具时，其最高工作温度在IEC 60598-1中规定。B15d表示由IEC 60061-1表7004-11和IEC 60061-2表7005-16定义的灯头/灯座配合，以及相应的量规。B22d表示由IEC 60061-1表7004-10和IEC 60061-2表7005-10定义的灯头/灯座配合，以及相应的量规。 [外文原描述]： IEC 61184:2017+AMD1:2019+AMD2:2024 CSV This document applies to bayonet lampholders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage of 250 V. This document also covers lampholders which are integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only. This fourth edition cancels and replaces the third edition published in 2008 and Amendment 1:2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Restructuring of the standard in accordance with IEC Directives Part 2. b) Clause 18: Update on creepage distances and clearances; c) Addition of Annex B.
英文名称Bayonet lampholders