标准摘要
[中文适用范围]： 本部分IEC 61300提供了关于IEC 61300-2（所有部分）和IEC 61300-3（所有部分）中定义的基本测试和测量程序的通用信息和指南，适用于互连设备、无源元件、机械接头、熔接保护器、光纤管理系统和保护外壳。本文件与相关规范结合使用，相关规范定义了要使用的测试、每个测试所需的严格程度、它们的顺序（如适用）以及允许的性能限制。如果本文件与相关规范之间存在冲突，以后者为准。 [外文原描述]： IEC 61300-1:2022+AMD1:2024 CSV provides general information and guidance for the basic test and measurement procedures defined in IEC 61300-2 (all parts) and IEC 61300-3 (all parts) for interconnecting devices, passive components, mechanical splices, fusion splice protectors, fibre management systems and protective housings. This document is used in combination with the relevant specification which defines the tests to be used, the required degree of severity for each of them, their sequence, if relevant, and the permissible performance limits. In the event of conflict between this document and the relevant specification, the latter takes precedence. This fifth edition cancels and replaces the fourth edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of the information of measurement uncertainties in 4.2.1; - change of the requirements for attenuation variation in 4.2.2; - addition of the multimode launch conditions of other fibres than A1-OM2, A1-OM3, A1-OM4, A1-OM5 and A3e in 10.4; - addition of the multimode launch conditions of the planer waveguide in 10.6; - splitting Annex A for EF and Annex B for EAF; - correction of errors in the definitions of encircled flux and encircled angular flux.
英文名称Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance