标准摘要
[中文适用范围]： 本部分规定了测试方法，用于确定施加于带有应变消除装置的软缆上的侧向载荷的影响。其意图是模拟在使用期间通常会遇到的由光纤缆线长度引起的静态载荷。组件在光学传输期间应能承受侧向载荷而不发生光学性能下降。除了护套外，任何控制光纤弯曲半径的特征均可视为应变消除装置。 [外文原描述]： IEC 61300-2-42:2014 specifies a test to determine the influence of a side load applied to a cord assembled with a strain relief. The intention is to simulate a static load, due to a length of fibre cable, which would typically be experienced during service. Components should withstand side loads during optical transmission without degradation of the optical performance. Besides a boot, any feature that controls the bending radius of the fibre can be considered as strain relief. This third edition cancels and replaces the second edition published in 2005 and constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: modification of the severity according to cable configurations. Keywords: side load, static load, optical performance, strain relief
英文名称Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief