+AMD1:2003 CSV 灯控制装置 第1部分：一般和安全要求

[中文适用范围]： IEC 61347 的这一部分规定了在 50 Hz 或 60 Hz 时电压高达 250 V 的直流电源和/或电压高达 1000 V 的交流电源上使用的灯控制设备的一般和安全要求。该标准还涵盖尚未标准化的灯的灯控制装置。本标准涉及的试验属于型式试验。不包括在生产过程中测试单个灯控制装置的要求。本第1部分应与相应的第2部分结合使用，第2部分包含补充或修改第1部分相应条款的条款，为每种类型的产品提供相关要求。 IEC 61347-1 第一版与 IEC 61347-2 第 1 至 9 部分一起取消并取代了 IEC 60920、IEC 60922、IEC 60924、IEC 60926、IEC 60928 和 IEC 61046，并构成较小修订。组成 IEC 61347-2 的各部分及其所替代的 IEC 标准之间的关系详细如下： IEC 61347-2-1 替代 IEC 60926 IEC 61347-2-2 替代 IEC 61046 IEC 61347-2-3 替代 IEC 60928 IEC 61347-2-4 替换 IEC 60924，第 3 节 IEC 61347-2-5 替换 IEC 60924，第 4 节 IEC 61347-2-6 替换 IEC 60924，第 5 节 IEC 61347-2-7 替换 IEC 60924，第 6 节 IEC 61347 -2-8 取代 IEC 60920 IEC 61347-2-9 取代 IEC 60922 [外文原描述]： This part of IEC 61347 specifies general and safety requirements for lamp controlgear for use on d.c. supplies up to 250 V and/or a.c. supplies up to 1 000 V at 50 Hz or 60 Hz. This standard also covers lamp controlgear for lamps which are not yet standardized. Tests dealt with in this standard are type tests. Requirements for testing individual lamp controlgear during production are not included. This part 1 is to be used in conjunction with the appropriate part 2, which contains clauses to supplement or modify the corresponding clauses in part 1, to provide the relevant requirements for each type of product. This first edition of IEC 61347-1, together with parts 1 to 9 of IEC 61347-2, cancels and replaces IEC 60920, IEC 60922, IEC 60924, IEC 60926, IEC 60928 and IEC 61046, and constitute a minor revision. The relationship between the parts that make up IEC 61347-2 and the IEC standards they replace is detailed as follows: IEC 61347-2-1 replaces IEC 60926 IEC 61347-2-2 replaces IEC 61046 IEC 61347-2-3 replaces IEC 60928 IEC 61347-2-4 replaces IEC 60924, Section 3 IEC 61347-2-5 replaces IEC 60924, Section 4 IEC 61347-2-6 replaces IEC 60924, Section 5 IEC 61347-2-7 replaces IEC 60924, Section 6 IEC 61347-2-8 replaces IEC 60920 IEC 61347-2-9 replaces IEC 60922