灯控制装置 第 1 部分：一般和安全要求

[中文适用范围]： IEC 61347-1:2015 RLV 包含官方 IEC 国际标准及其红线版本。 Redline 版本仅提供英文版本，为您提供了一种快速、简单的方法来比较官方 IEC 标准与其先前版本之间的所有更改。 IEC 61347-1:2015 规定了在 50 Hz 或 60 Hz 时使用高达 250 V 直流电源和/或高达 1000 V 交流电源的灯控制设备的一般和安全要求。第三版取消并取代了 2007 年发布的第二版，修正案 1:2010 和修正案 2:2012。此版本构成技术修订。相对于前一版本，本版本包括以下重大技术变化： a) 附加标记要求； b) 爬电距离和电气间隙的附加要求： ——对于工作频率高达 30 kHz 的工作电压； - 适用于工作频率高于 30 kHz 的工作电压； - 用于脉冲和谐振电压点火； - 用于基本绝缘、附加绝缘和加强绝缘； - 用于电路之间的绝缘； - 用于涂层或封装的控制装置； c) 修改ELV和FELV的定义； d) 修改原理图，显示不同的控制设备分类和绝缘要求； e) 范围扩展； f) 新附录A：测试以确定导电部件是否为可能导致触电的带电部件； g) 新附录 M：可能要求更高可用性（冲击耐受类别 III）的控制设备的爬电距离和电气间隙； h) 新附件Q：Up计算示例； i) 新附录 P：通过使用涂层或灌封来防止污染的灯控制装置的爬电距离、电气间隙和隔离距离 (DTI)； j) 新附录 R：爬电距离和电气间隙的概念。关键词：农村电气化；灯光;智慧城市；低压直流 [外文原描述]： IEC 61347-1:2015 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 61347-1:2015 specifies general and safety requirements for lamp controlgear for use on d.c. supplies up to 250 V and/or a.c. supplies up to 1 000 V at 50 Hz or 60 Hz. This third edition cancels and replaces the second edition published in 2007, Amendment 1:2010 and Amendment 2:2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) additional marking requirements; b) additional requirements for creepage distances and clearances: - for working voltages with operating frequencies up to 30 kHz; - for working voltages with higher operating frequencies than 30 kHz; - for impulse and resonance voltages ignition; - for basic, supplementary and reinforced insulation; - for insulation between circuits; - for coated or potted controlgear; c) modification of definition of ELV and FELV; d) modification of schematic drawing, showing the different controlgear classification and insulation requirements; e) scope extension; f) new Annex A: test to establish whether a conductive part is a live part which may cause an electric shock; g) new Annex M: creepage distances and clearances for controlgear where a higher degree of availability (impulse withstand category III) may be requested; h) new Annex Q: example for Up calculation; i) new Annex P: creepage distances and clearances and distance through isolation (DTI) for lamp controlgear which are protected against pollution by the use of coating or potting; j) new Annex R: concept of creepage distances and clearances.