标准摘要
[中文适用范围]： IEC 61347 的这一部分规定了荧光灯和其他放电灯的启动装置（辉光启动器和点火器以外的启动器）的特殊安全要求，这些灯用于在 50 Hz 或 60 Hz 下高达 1 000 V 的交流电源上，产生的启动脉冲不大于100 kV，与 IEC 60081、IEC 60188、IEC 60192、IEC 60662、IEC 60901、IEC 61167、IEC 61195、IEC 61199、IEC 61347-2-8 和 IEC 61347-2- 涵盖的灯和镇流器组合使用9.它不适用于集成在放电灯中或手动操作的辉光启动器或启动装置。 IEC 61347-2-8 涵盖了荧光灯的预热变压器。注：辉光启动器在 IEC 60155 中涉及。该标准仅涉及与国际上需求量最大的镇流器和灯一起使用的启动装置。 IEC 60927 中给出了性能要求。 [外文原描述]： This part of IEC 61347 specifies particular safety requirements for starting devices (starters other than glow starters and ignitors) for fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination with lamps and ballasts covered in IEC 60081, IEC 60188, IEC 60192, IEC 60662, IEC 60901, IEC 61167, IEC 61195, IEC 61199, IEC 61347-2-8 and IEC 61347-2-9. It does not apply to glow starters or starting devices which are incorporated in discharge lamps or which are manually operated. Preheat transformers for fluorescent lamps are covered by IEC 61347-2-8. This first edition of IEC 61347-2-1, together with IEC 61347-1, cancels and replaces the second edition of IEC 60926, published in 1995, and constitutes a minor revision. This standard shall be used in conjunction with IEC 61347-1. It was established on the basis of the first edition (2000) of that standard.
英文名称Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)