低压开关设备和控制设备组件第7部分:码头、露营地、市场广场、电动汽车充电站等特殊应用组件

[中文适用范围]： IEC 61439-1:2011 第 1 条适用，但以下情况除外。替换： 注 1 在本文件中@术语 AMHS（见 3.1.701）@ ACCS（见 3.1.702）@ AMPS（见 3.1.703）@ AEVCS（见 3.1.7704）用于低压开关设备和控制设备分别用于码头和类似地点 (AMHS)@露营地和类似地点 (ACCS)@市场广场和其他类似外部公共场所 (AMPS) 和充电站 (AEVCS) 的组件。术语“组件”用于指示所有这些板。 IEC 61439的本部分定义了成套设备的具体要求如下： ?C成套设备，其额定电压在交流时不超过1000V，在直流时额定电压不超过1500V； ?C 组件，用于与电能的发电、传输、分配和转换以及电能消耗设备的控制； ?由普通人操作的组件（例如插拔电气设备）； ?C 组件旨在安装和使用在市场广场@码头@露营地和其他类似的户外公共场所； ?C 组件适用于模式 3 和模式 4 的电动汽车充电站 (AEVCS)。它们旨在根据 IEC 61851-1:2017 集成电动汽车传导充电系统的功能和附加要求。为了正确选择开关设备和组件@，适用以下标准： ?C IEC 60364-7-709 (AMHS) 或 ?C IEC 60364-7-708 (ACCS) 或 ?C IEC 60364-7-740 (AMPS) ) 或 ?C IEC 60364-7-722 (AEVCS)。本文件适用于所有组件，无论它们是一次性设计、制造和验证的，还是完全标准化和批量制造的。制造和/或组装可以由原始制造商以外的机构进行（参见 IEC 61439-1:2011 的 3.10.1）。本文件不适用于符合相关产品标准的单个设备和独立组件，例如断路器@熔断器开关@电子设备@。注 2：如果电气设备直接连接到公共低压供电系统，并配备了用于向低压供电的合法提供商计费的仪表，则@适用基于国家法规的附加特殊要求@（如果有）。本文件不适用于 IEC 60670-24 中定义的家用和类似固定电气装置的电气配件盒和外壳。 [外文原描述]： IEC 61439-7:2018 defines the specific requirements of assemblies as follows: - assemblies for which the rated voltage does not exceed 1 000 V in the case of AC or 1 500 V in the case of DC; – assemblies intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment; – assemblies operated by ordinary persons (e.g. plug and unplug of electrical equipment); – assemblies intended to be installed and used in market squares, marinas, campsites and other similar outdoor public sites; – assemblies intended for charging stations for electric vehicles (AEVCS) for Mode 3 and Mode 4. They are designed to integrate the functionality and additional requirements for electric vehicle conductive charging systems according to IEC 61851-1:2017. This first edition cancels and replaces the relevant technical specification published in 2014. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous technical specification: a new classification of the stationary ASSEMBLIES in accordance with their mechanical resistance (5.702); a new Table 702 with the list of tests and relevant severities to which the ASSEMBLIES have to be subjected according to the classification mentioned at point a); a new Annex (CC) with a new endurance test for the individual switching devices intended to be used in AEVSC, if they have not already been tested against this requirement; a general editorial review and a technical revision. The contents of the corrigendum of August 2019 have been included in this copy.