电子设备的机械结构.IEC 60917标准和IEC 60297标准测试.第1部分:环境要求,贮藏柜,行李架,插箱和底盘在室内条件下的试验装备和安全性

[中文适用范围]： 范围和目标 IEC 61587 的这一部分规定了室内条件下空机柜@即机柜@机架@子架和机箱的环境要求@测试设置@以及安全方面。该标准的目的是建立物理性能的定义级别，以满足存储@运输和最终位置条件的某些要求。它仅全部或部分适用于机柜@机架@子架和机箱@的机械结构，但不适用于电子设备。 [外文原描述]： IEC 61587-1:2011 specifies environmental requirements, test set-up, as well as safety aspects for empty enclosures, i.e. cabinets, racks, subracks and chassis under indoor conditions. The purpose of this standard is to establish defined levels of physical performance in order to meet certain requirements of storage, transport and final location conditions. It applies in whole or part only to the mechanical structures of cabinets, racks, subracks and chassis, but it does not apply to electronic equipment. This third edition cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Rephrasing "performance level" by "classification"; - Reference to fire hazard testing according to IEC 60695-11-10 in 8.2.1; - Intended applications replaced by application examples; - Static load test, distributed dummy load locations for ETSI and 19" removed; - Table "Static load distribution within the cabinet" IEC 60297-2 changed to IEC 60297-3-100; - IEC 60917 subrack 625 mm wide has been removed, as it is not a common width; - Parts of the document relevant to outdoors have been removed (reference to 61969 series).