烹饪油烟净化器.性能测量方法

[中文适用范围]： 本标准适用于家用厨房中装有风扇进行循环或排烟模式的油烟提取器。 也可用于风扇与设备分开安装但由设备控制的油烟提取器，当风扇在技术文件（如铭牌数据）和安装说明中定义时。 本标准还涉及布置在烹饪设备旁边、后面或下方的下吸式系统。 本标准定义了这些设备的主要性能特征，这些特征对用户感兴趣，并规定了测量这些特征的方法。 本标准未规定性能的分类或排名。 注1：本标准不涉及符合IEC 60335-1和IEC 60335-2-31的安全要求。 注2：由中央通风系统操作的无风扇油烟提取器在EN 13141-3中涵盖。 [外文原描述]： IEC 61591:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 61591:2023 edition 3.0 and the previous IEC 61591:2019 edition 2.0. Furthermore, comments from IEC SC 59K experts are provided to explain the reasons of the most relevant changes, or to clarify any part of the content. IEC 61591:2023 applies to cooking fume extractors incorporating a fan for the recirculation or extraction mode situated in a household kitchen. It can also be used for cooking fume extractors where the fan is mounted separately from the appliance, but controlled by the appliance when the fan is defined in the technical documentation (e.g. name plate data) and instructions for installation. This document deals also with down-draft systems arranged beside, behind or under the cooking appliance. This document defines the main performance characteristics of these appliances, which are of interest to the user, and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This document does not deal with safety requirements that are in accordance with IEC 60335-1 and IEC 60335-2-31. Cooking fume extractors without fans operated by a central ventilation system are covered in EN 13141-3. This third edition cancels and replaces the second edition published in 2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) new definition of working point, see 3.19; b) new definition for lowest setting and automatic setting, see 3.17 and 3.18; c) revised requirements for installation and positioning, see 6.2; d) added a normative reference ISO 5801 for the specification of the pressure compensation chamber, see Clause 10; e) separate clauses for determining the volumetric airflow and fluid dynamic efficiency, see Clauses 10 and 11; f) new approach for determining the fluid dynamic efficiency ("9-point calculation"); g) new definitions, new clause and new Annex B regarding the measurement of low-power modes; h) new Annex A: assumption for the parameter b.