标准摘要
[中文适用范围]： IEC 61747 的这一部分仅限于使用段式、无源或有源矩阵以及消色差或彩色型 LCD 的透射式液晶显示模块。此外，本文档还包含背光打开时的透反液晶模块的透射模式。与触摸面板或前灯单元组合的 LCD 模块不包括在范围内，因为测量通常不准确。测量前移除触摸面板或前灯单元。在该标准的整个主体中，假设集成背光源为测量提供照明。如果提供了外部背光源，则与此的偏差（例如，没有集成背光源的分段显示器）通常可以按照与具有集成背光源的显示模块相同的方式来处理。但两种情况中的一种应当区别处理的，将予以特别说明。 [外文原描述]： IEC 61747-30-1:2012 is restricted to transmissive liquid crystal display-modules using either segment, passive or active matrix and achromatic or colour type LCDs. Furthermore, the transmissive modes of transflective LCD modules with backlights ON are comprised in this document. An LCD module in combination with a touch-panel or a front-light-unit is excluded from the scope because measurements are frequently inaccurate. Touch-panels or front-light-units are removed before measurement. Throughout the main body of this standard, an integrated backlight is assumed to provide the illumination for the measurements. Deviations from this (e.g. segmented displays without integrated backlights) may usually be handled in the same way as display modules with integrated backlight, if an external backlight is provided. However, in the case where one of the two situations should be handled differently, this will be specifically stated. This first edition cancels and replaces IEC 61747-6 published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the document structure was brought in line with 61747-6-2; and b) various technical and editorial changes were made. This publication is to be read in conjunction with IEC 61747-1:1998 .
英文名称Liquid crystal display devices - Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type