标准摘要
[中文适用范围]： 本部分IEC 61755规定了对密封式光纤接续盒进行类别划分所需的最小测试项目、测试强度及测量要求。当接续盒满足IEC 61753-1:2018中表A.13所定义的A类——架空型标准时，即符合本部分规定。本文件不涉及呼吸式（非密封）接续盒。 [外文原描述]： IEC 61753-111-07:2021 contains the minimum tests, test severities and measurement requirements which a sealed fibre optic closure need to meet in order to be categorised as meeting the IEC standard for category A – Aerial, as defined in Table A.13 of IEC 61753‑1:2018. Free breathing closures are not covered in this document. This first edition cancels and replaces IEC 61753-111-7 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753‑111‑7: terms and definitions updated according to IEC 61753-1:2018 and IEC 61756-1:2019; detailed test severities added for UV light and fungus resistance tests of materials; test severities updated according to IEC 61753-1:2018; test overpressure for sealing tests changed to 20 kPa; pass-fail criterion of pressure loss during test added to mechanical sealing tests; laboratory test conditions harmonized with IEC 61300-1 to +23 °C ± 5 °C, unless otherwise specified; addition of B-657 fibre types with minimum bending radius of stored fibres according to IEC 61756-1:2019; vibration sealing test changed to 10 Hz, 3 mm amplitude and 1 000 000 cycles; reduced loads added in cable retention test for small diameter cables and tubes; reduced loads for cable axial compression test for small diameter cables and tubes; duration of the cycles in torsion and bending test added; free fall test removed (is covered now by the optical shock test); duration of the assembly and disassembly test reduced to 5 cycles; duration of the change of temperature reduced to 12 cycles.
英文名称Fibre optic interconnecting devices and passive components - Performance standard - Part 111-07: Sealed closures - Category A - Aerial