标准摘要
[中文适用范围]： IEC 61755 的这一部分定义了参考连接器的光学接口的尺寸限制，以满足用于现场或工厂衰减测量的带有圆柱形插芯的非角度抛光多模参考连接器的光纤到光纤互连的特定要求。 。本文档中定义了一个等级的参考连接器。参考连接器端接到选定的 IEC 60793-2-10:2015 A1a 光纤。指定参考连接器的几何尺寸和公差主要是为了限制多组两个参考连接器@之间测量衰减的变化，从而限制在现场与连接器配合时随机选择的参考连接器之间测量衰减的变化或工厂。 [外文原描述]： IEC 61755-6-2: 2018 defines the dimensional limits of an optical interface for reference connectors necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled polished multimode reference connectors with cylindrical ferrules intended to be used for attenuation measurements in the field or factory. One grade of reference connector is defined in this document. The reference connector is terminated to selected IEC 60793-2-10:2015 A1a fibre. The geometrical dimensions and tolerances of the specified reference connector have been developed primarily to limit the variation in measured attenuation between multiple sets of two reference connectors, and therefore to limit the variation in measured attenuation between randomly chosen reference connectors when mated with connectors in the field or factory. Keywords: optical interface, fibre-to-fibre interconnection
英文名称Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2: Connection of 50 μm core diameter multimode physically contacting fibres - Non-angled for reference connector application, at wavelength of 850 nm using selected A1a fibre only