工业网络.配置文件.第1-19部分:现场总线配置文件.通信配置文件系列19

[中文适用范围]： 本部分 IEC 61784-1 定义了通信配置文件族 19 (CPF 19)。CPF 19 规定了基于 IEC 61158 系列(类型 24 和类型 27)和其他标准的一组协议特定的通信配置文件(CPs)，用于工厂制造和过程控制中涉及通信的设备设计。 注1 所有 CP 均基于 IEC 发布的标准或草案标准或国际标准，或其他标准机构或开放标准流程建立的标准或国际标准。 注2 CPF 19 的一些 CP 在 IEC 61784-2-19 中规定。 每个 CP 从 IEC 61158 系列中定义和建模的相关集合中选择一个适当、一致和兼容的服务和协议子集。对于选定的服务和协议子集，该配置文件还描述了参数值中任何可能或必要的约束。 [外文原描述]： IEC 61784-1-19:2023 defines Communication Profile Family 19 (CPF 19). CPF 19 specifies a set of protocol specific communication profiles (CPs) based on the IEC 61158 series (Type 24 and Type 27) and other standards, to be used in the design of devices involved in communications in factory manufacturing and process control. NOTE 1 All CPs are based on standards or draft standards or International Standards published by the IEC or on standards or International Standards established by other standards bodies or open standards processes. NOTE 2 Some CPs of CPF 19 are specified in IEC 61784-2-19. Each CP selects an appropriate consistent and compatible subset of services and protocols from the relevant set that is defined and modelled in the IEC 61158 series. For the selected subset of services and protocols, the profile also describes any possible or necessary constraints in parameter values.