+AMD1:2016 CSV 可调速电力驱动系统 第 5-1 部分：安全要求 电力、热力和能源

[中文适用范围]： IEC 61800-5-1:2007+A1:2016 它规定了可调速电力驱动系统或其元件在电气、热和能源安全方面的要求。除接口要求外，它不涵盖驱动设备。它适用于可调速电力驱动系统，包括功率转换、驱动控制和电机。不包括牵引和电动车辆驱动。它适用于连接到线路电压高达 1 kV、交流、50 Hz 或 60 Hz 的直流驱动系统，以及转换器输入电压高达 35 kV、50 Hz 或 60 Hz、输出电压高达 35 kV 的交流驱动系统。该版本的主要变化如下： ——在第 3 条中添加了按字母顺序排列的表 1； - 在 4.1 中添加与 PDS/CDM/BDM 相关的表 2； ——增加了表4中决定性电压等级要求的总结； ——扩展了有关保护性粘合的子条款（4.3.5.3）； ——澄清了接触电流和保护导体电流之间的区别； - 修订绝缘部分（现为 4.3.6）以包括固体绝缘； ——在高压绝缘电压中增加了过电压类别I和II； - 修订了固体绝缘部分（现为 4.3.6.8）； ——增加了高频绝缘要求（4.3.6.9，附录E）； ——增加了液冷PDS的要求（4.4.5）； ——增加了气候和振动测试（5.2.6）； ——澄清电压试验程序以避免基本绝缘过应力（5.2.3.2.3）；一修改了大型、高压、一次性PDS的短路试验要求（现为5.2.3.6）； - 添加了有关过压类别减少的信息性附录 B。该合并版本由第二版（2007年）及其修正案1（2016年）组成。因此，无需对本出版物进行修订。 [外文原描述]： IEC 61800-5-1:2007+A1:2016 It specifies requirements for adjustable speed power drive systems, or their elements, with respect to electrical, thermal and energy safety considerations. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electric drive systems which include the power conversion, drive control, and motor or motors. Excluded are traction and electric vehicle drives. It applies to d.c. drive systems connected to line voltages up to 1 kV a.c., 50 Hz or 60 Hz and a.c. drive systems with converter input voltages up to 35 kV, 50 Hz or 60 Hz and output voltages up to 35 kV. The major areas of change in this edition are the following: - addition of alphabetical Table 1 in Clause 3; - addition of Table 2 in 4.1 for relevance to PDS/CDM/BDM; - addition of Table 4 summary of decisive voltage class requirements; - expansion of subclause on protective bonding (4.3.5.3); - clarification of distinction between touch current and protective conductor current; - revision of section on insulation (now 4.3.6) to include solid insulation; - addition of overvoltage categories I and II to HV insulation voltage; - revision of section on Solid insulation (now 4.3.6.8); - addition of high-frequency insulation requirements (4.3.6.9, Annex E); - addition of requirements for liquid-cooled PDS (4.4.5); - addition of climatic and vibration tests (5.2.6); - clarification of voltage test procedure to avoid over-stress of basic insulation (5.2.3.2.3); - revision of short-circuit test requirement for large, high-voltage and one-off PDS (now 5.2.3.6); - addition of informative Annex B for overvoltage category reduction. This consolidated version consists of the second edition (2007) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication.