标准摘要
[中文适用范围]： IEC 62282-3-200:2025 涵盖了固定式燃料电池发电系统的性能方面的运行与环境特性。其测试方法适用于以下方面：在规定的运行及瞬态条件下测量输出功率；在规定的运行条件下评估电气效率与余热回收效率；在规定的运行及瞬态条件下测定环境特征，例如尾气排放与噪声。本文件适用于各类固定式燃料电池技术，包括：碱性燃料电池（AFC）、磷酸燃料电池（PAFC）、聚合物电解质燃料电池（PEFC）、熔融碳酸盐燃料电池（MCFC）以及固体氧化物燃料电池（SOFC）。第三版取代并废止了 2015 年发布的第二版。相对于前一版本，本版本包含以下重大技术变更：修订引言、适用范围及第 3 章；修订表 1 中的符号；修订图 2（符号图）；修订测量方法（第 8.3 条）；修订效率测试（第 10.2 条）；修订电功率与热功率响应特性测试（第 10.3 条）；修订启停特性测试（第 10.4 条）；修订附录 C。 [外文原描述]： IEC 62282-3-200:2025 covers operational and environmental aspects of the stationary fuel cell power systems performance. The test methods apply as follows: - power output under specified operating and transient conditions; - electrical and heat recovery efficiency under specified operating conditions; - environmental characteristics, for example, exhaust gas emissions, noise, under specified operating and transient conditions. This document applies to all kinds of stationary fuel cell technologies, such as: - alkaline fuel cells (AFC); - phosphoric acid fuel cells (PAFC); - polymer electrolyte fuel cells (PEFC); - molten carbonate fuel cells (MCFC); - solid oxide fuel cells (SOFC). This third edition cancels and replaces the second edition published in 2015. This edition includes the following significant technical changes with respect to the previous edition: - revision of the Introduction, Scope and Clause 3; - revision of the symbols in Table 1; - revision of Figure 2 (symbol diagram); - revision of measurement methods (8.3); - revision of the efficiency test (10.2); - revision of the electric power and thermal power response characteristics test (10.3); - revision of the start-up and shutdown characteristics test (10.4); - revision of Annex C.
英文名称Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods