燃料电池技术 第4-102部分：电动工业卡车燃料电池动力系统 性能测试方法

[中文适用范围]： IEC 62282-4-102:2022 RLV 包含官方 IEC 国际标准及其红线版本。 Redline 版本仅提供英文版本，为您提供了一种快速、简单的方法来比较官方 IEC 标准与其先前版本之间的所有更改。 IEC 62282-4-102:2022规定了推进和辅助动力装置（APU）的燃料电池动力系统的性能测试方法。本文件涵盖除道路车辆以外的推进用燃料电池动力系统。本文件适用于电动工业卡车的气态氢燃料电池动力系统和直接甲醇燃料电池动力系统。以下燃料被认为属于本文件的范围： - 气态氢和 - 甲醇。本文件涵盖了3.7和图1中定义的燃料电池电源系统。本文件适用于室内和室外使用的额定输出电压不超过DC 150 V的直流型燃料电池电源系统。本文件涵盖燃料电池动力系统，其燃料源容器永久连接到工业卡车或燃料电池动力系统。第二版取消并取代了 2017 年发布的第一版。该版本相对于前一版本包括以下重大技术更改：范围与 IEC 62282-4-101:2022 第二版保持一致； b.删除术语和定义（之前的条目 3.5、3.10 和 3.15）； C。第 3 条中添加新术语：“输送电力”(3.13) 和“再生电力”(3.14)； d.根据 IEC 62282-3-201 修订符号及其含义； e.将第 5 条中的“参考条件”替换为“标准条件”； F。修订附件负载电压尖峰测试的测试方法（13.3.2）； G。在第 14 条（运行中的功率稳定性）中添加了说明； H。添加本文件中涉及的绩效标准清单（附件 C）。 [外文原描述]： IEC 62282-4-102:2022 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 62282-4-102:2022 specifies the performance test methods of fuel cell power systems for propulsion and auxiliary power units (APU). This document covers fuel cell power systems for propulsion other than those for road vehicles. This document applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks. The following fuels are considered within the scope of this document: - gaseous hydrogen, and - methanol. This document covers the fuel cell power system as defined in 3.7 and Figure 1. This document applies to DC type fuel cell power systems, with a rated output voltage not exceeding DC 150 V for indoor and outdoor use. This document covers fuel cell power systems whose fuel source container is permanently attached to either the industrial truck or the fuel cell power system. This second edition cancels and replaces the first edition published in 2017. This edition includes the following significant technical changes with respect to the previous edition: a. alignment of the Scope with the second edition of IEC 62282-4-101:2022; b. deletion of terms and definitions (previous entries 3.5, 3.10, and 3.15); c. addition of new terms in Clause 3: "delivered power" (3.13) and "regenerated power" (3.14); d. revision of symbols and their meanings in alignment with those of IEC 62282-3-201; e. replacement of "reference conditions" with "standard conditions" as seen in Clause 5; f. revision of the test method for the accessory load voltage spike test (13.3.2); g. addition of clarifications in Clause 14 (Power stability under operation); h. addition of a checklist for performance criteria dealt with in this document (Annex C).