模块用直流或交流电子控制设备.性能要求

[中文适用范围]： This document specifies performance requirements for electronic controlgear for use on DC or AC supplies up to 1000 V (alternating current at 50 Hz or 60 Hz) and with an output frequency which can deviate from the supply frequency, associated with LED modules according to IEC 62031. Controlgear for LED modules specified in this document are designed to provide constant voltage or current. Deviations from the pure voltage and current types do not exclude the gear from this document. NOTE 1 The tests in this document are type tests. Requirements for testing individual controlgear during production are not included. NOTE 2 Requirements for controlgear which incorporate means for varying the output power are under consideration. NOTE 3 It can be expected that controlgear complying with this document will ensure satisfactory operation between 92% and 106% of the rated supply voltage, taking into account the specifications of the LED module manufacturer. [外文原描述]： IEC 62384:2020 specifies performance requirements for electronic controlgear for use on DC or AC supplies up to 1 000 V (alternating current at 50 Hz or 60 Hz) and with an output frequency which can deviate from the supply frequency, associated with LED modules according to IEC 62031. Controlgear for LED modules specified in this document are designed to provide constant voltage or current. Deviations from the pure voltage and current types do not exclude the gear from this document. This second edition cancels and replaces the first edition published in 2006 and Amendment 1:2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - scope extension (direct current from 250 V to 1 000 V); - new specifications for measuring the power factor for controlgear with settable/non-constant output (for instance, to allow for constant light output); - deletion of audio frequency requirements; - selection of current test circuit by module capacitance (instead of selecting by having or not having logic circuitry) plus test circuit setup changes.