标准摘要
[中文适用范围]： 本部分IEC 62563描述了用于测试医疗图像显示系统的评估方法。本国际标准的范围针对可以通过视觉评估或使用基本测试设备测量的实际测试。可以在这些设备上进行更高级或更定量的测量，但这些超出了本文档的范围。本标准适用于可以显示单色图像信息的医疗图像显示系统，这些系统可以以灰度值的形式在彩色和灰度及彩色图像显示系统（例如阴极射线管（CRT）监视器、平板显示器投影系统）上显示。本标准适用于用于诊断（解释医学图像以提供临床诊断）或查看（出于医学目的查看医学图像而非提供医学解释）的医疗图像显示系统，因此在图像质量方面有特定要求。头戴式图像显示系统和用于确认定位和系统操作的图像显示系统不在本标准的范围内。手持式图像显示系统可能需要本标准中描述的程序的其他或修改版本。本标准不定义验收和一致性测试的要求，也不定义一致性测试的频率。 [外文原描述]： IEC 62563-1:2009+A1:2016 describes the evaluation methods for testing medical image display systems. It is directed to practical tests that can be visually evaluated or measured using basic test equipment. More advanced or more quantitative measurements can be performed on these devices, but these are beyond the scope of this document. IEC 62563-1:2009 applies to medical image display systems, which can display monochrome image information in the form of greyscale values on colour and greyscale image display systems (e.g. cathode ray tube (CRT) monitors, flat panel displays, projection system). This standard applies to medical image display systems used for diagnostic (interpretation of medical images toward rendering clinical diagnosis) or viewing (viewing medical images for medical purposes other than for providing a medical interpretation) purposes and therefore having specific requirements in terms of image quality. Head mounted image display systems and image display systems used for confirming positioning and for operation of the system are not covered by this standard. This consolidated version consists of the first edition (2009) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication.
英文名称Medical electrical equipment - Medical image display systems - Part1: Evaluation methods