设备用图形符号.IEC出版物中图形符号的使用指南

[中文适用范围]： 本文件提供了指南，以确保符合ISO/IEC Directives, Part 2:2021, 28.6.2的要求，使IEC产品出版物中使用的设备图形符号与水平出版物IEC 60417和ISO 7000的要求一致。本文件旨在供任何IEC和ISO委员会使用，以开发用于设备的图形符号，以便包含在其产品出版物中。 本文件基于并发展了IEC Guide 108:2019的第8条款。 对于创建用于设备的新图形符号，应用IEC 80416-1和ISO 80416-2。对于标准化图形符号在设备上的应用，应用IEC 80416-3和ISO 80416-4。 本水平出版物主要供委员会根据IEC Guide 108中规定的原则准备出版物时使用。 委员会的责任之一是在适用的情况下，在准备其出版物时利用水平出版物。除非在相关出版物中特别引用或包含，否则本水平出版物的内容不适用。 [外文原描述]： IEC 62648:2022 document provides guidelines to help ensure that the requirement in ISO/IEC Directives, Part 2:2021, 28.6.2 is met, such that graphical symbols for use on equipment in IEC product publications are consistent with the requirements of horizontal publications IEC 60417, and ISO 7000. This document is intended to be used by any IEC and ISO committees to develop graphical symbols for use on equipment for inclusion in their product publications. This document is based on and develops upon IEC Guide 108:2019, Clause 8. For the creation of new graphical symbols for use on equipment, IEC 80416-1 and ISO 80416 2 are applied. For the application of standardized graphical symbols for use on equipment, IEC 80416-3 and ISO 80416-4 are applied. This horizontal publication is primarily intended for use by committees in the preparation of publications in accordance with the principles laid down in IEC Guide 108. One of the responsibilities of a committee is, wherever applicable, to make use of horizontal publications in the preparation of its publications. The contents of this horizontal publication will not apply unless specifically referred to or included in the relevant publications. IEC 62648:2022 cancels and replaces the first edition published in 2012 and Amendment 1:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) new terms and definitions in IEC Guide 108 have been incorporated; b) the designation "IEC 60417 SDB" has been introduced following the publication of IEC Supplement:2022, Annex SK; c) Subclause 6.3 has been adapted in line with IEC Guide 108:2019, Clause 8.